*replaced SF-BOB-12035* USB Micro-B Connector Breakout Board (POLOLU-2592)

This board breaks out the VBUS, GND, D-, D+ and ID pins of a USB Micro-B connector. The VBUS and GND pins can be used to power your project from USB, while the D- and D+ pins give you access to the USB’s differential data signal. Each of these pins, along with the ID pin, are broken out into a 1×5 row of 0.1"-spaced pins on the board. The included 1×5straight male header can be soldered to these pins to allow the board to be used with standard perfboards, solderless breadboards, and 0.1" connectors.

This tiny unit measures only 0.39" × 0.5" (0.44" × 0.5" including its USB micro-B connector) and has two 0.086" diameter semi-circular holes for mounting with #2 or M2 screws.