PiTFT Mini Kit - 320x240 2.8" TFT+ Capacitive Touchscreen (Adafruit 1983)
      PiTFT Mini Kit - 320x240 2.8" TFT+ Capacitive Touchscreen (Adafruit 1983)
      PiTFT Mini Kit - 320x240 2.8" TFT+ Capacitive Touchscreen (Adafruit 1983)
      PiTFT Mini Kit - 320x240 2.8" TFT+ Capacitive Touchscreen (Adafruit 1983)
      PiTFT Mini Kit - 320x240 2.8" TFT+ Capacitive Touchscreen (Adafruit 1983)
      PiTFT Mini Kit - 320x240 2.8" TFT+ Capacitive Touchscreen (Adafruit 1983)

      PiTFT Mini Kit - 320x240 2.8" TFT+ Capacitive Touchscreen (Adafruit 1983)

      Adafruit 1983
      €30.24
      €43.20
      Tax Included
      Save 30%

      25.20 € tax excl.

      PiTFT Mini Kit - 320x240 2.8" TFT+ Capacitive Touchscreen (Adafruit 1983)

      Quantity :
      OUT OF STOCK

      PiTFT Mini Kit - 320x240 2.8" TFT+ Capacitive Touchscreen (Adafruit 1983)

      Our best-selling PiTFT just got a fancy upgrade, now we have a version with a capacitive touchscreen! That's right, instead of a resistive touchscreen, which requires a fingernail or stylus, you can now use a fingerpad. The screen looks much nicer, with a black bezel and glass overlay. Featuring a 2.8" display with 320x240 16-bit color pixels and a single-touch capacitive touch overlay. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!

      We're still poking at Raspberry Pi B+ support (hey it just came out like last week) and we're recompiing kernels as fast as we can! Right now only RasPi model A and B are supported

      Uses the hardware I2C Pins (SDA & SCL), SPI pins (SCK, MOSI, MISO, CE0) as well as GPIO #25 and #24. All other GPIO are unused and you can still share the I2C pins with sensors, LED drivers, etc. Since we had a tiny bit of space, there's 4 spots for optional slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on/off button. See below for the link to get the optional tact switches, they're not included. The screen is the same size as the resistive type so you can use this with the PiTFT PiBow or any other enclosure you may already have. We also use the same SDL device and signals so PyGame and X11 based programs can be swapped in with no changes in code.

      This version comes as a mini-kit, with a 2x13 extra-tall female header (to connect the plate to the Pi) and a 2x13 male header that can be used to connect an IDC cable or cobbler from the side. The photos above also show the optional installed slim tactile buttons. The tactile buttons are not included, but you can pick up a pack of 20 here. Some basic soldering is required to install the headers. You can also pick up an extra-long Pi stacking header if you want to install that instead of the 2x13 female header installed.

      • Display current draw is mostly based on the backlight, with full-on backlight the current draw is ~100mA.
      • Screen Dimensions: 50mm x 69mm x 4mm / 2" x 2.7" x 0.16"
      • PCB Dimensions: 56mm x 85mm x 2mm / 2.2" x 3.4" x 0.08"
      • Weight: 44g
      Adafruit Industries
      Adafruit 1983

      Specific References

      PiTFT Mini Kit - 320x240 2.8" TFT+ Capacitive Touchscreen (Adafruit 1983)

      PiTFT Mini Kit - 320x240 2.8" TFT+ Capacitive Touchscreen (Adafruit 1983)

      €30.24
      €43.20
      Tax Included
      Save 30%

      25.20 € tax excl.