Biscuit – Programmable Wi-Fi 9-Axis Absolute Orientation Sensor
      Biscuit – Programmable Wi-Fi 9-Axis Absolute Orientation Sensor

      Biscuit – Programmable Wi-Fi 9-Axis Absolute Orientation Sensor

      HK-BISCUIT
      Biscuit – Programmable Wi-Fi 9-Axis Absolute Orientation Sensor
      Množstvo:
      Biscuit – Programmable Wi-Fi 9-Axis Absolute Orientation Sensor
      Biscuit™ – Programmable Wi-Fi 9-Axis Absolute Orientation Sensor

      The Biscuit™ is an integrated module consisting of 3 dimensional motion sensor and Wi-Fi communication module.

      The 3 dimensional motion sensor includes Accelerometer, Gyroscope and Geomagnetic sensor.
      The Biscuit™ provides 3-axis absolute orientation in the format of Quaternion, Euler Angle or Rotation Vector as well as Linear Acceleration, Gravity, Heading and Temperature.

      The Wi-Fi module has an inherent micro controller unit (MCU) on which users can download their own programs developed on separate development environment (IDE).
      The Biscuit™ can be operated using USB bus power or battery to be used as an independent device untethered to a host.

      More technical information      https://github.com/withrobot/Biscuit/blob/master/Product(English)/README.md

      SPECIFICATIONS

      Sensor Data 
      3-Axis Gyroscope
      3-Axis Accelerometer
      3-Axis Geomagnetic Sensor
      3-Axis Orientation: Quaternion, Euler Angle, Rotation Vector
      Linear Acceleration
      Gravity
      Heading
      Temperature

      Sensor Performance
      Accelerometer Ranges: ±2g, ±4g, ±8g, ±16g selectable
      Accelerometer Resolution: 14 bit
      Gyroscope Ranges: ±125°/s, ±250°/s, ±500°/s, ±1000°/s, ±2000°/s selectable
      Gyroscope Resolution: 16 bit
      Geomagnetic Sensor Ranges: ±1300µT (x, y axis), ±2500µT (z axis)
      Geomagnetic Sensor Resolution: 13 / 13 / 15 bits for x / y / z axes

      Wi-Fi
      Protocol: 802.11 b/g/n
      Frequency: 2.4 GHz band

      MCU
      CPU: 32-bit, 80 MHz
      Flash Memory: 2 MB

      IDE
      Arduino IDE

      Size
      25 mm x 48 mm (PCB)

      Power
      USB Bus or Battery Operated
      Consumption: 75 mA (sensors and Wi-Fi turned-off)
      Input Voltage: 3.7 ~ 5.0 V

      Board Layout

      Set-up

      Warning!!
      Incorrect battery connection can damage the Biscuit™. If your battery has different outputs from the one shown on the above picture, please use the accompanied cable to switch the polarity. Compatible Battery Connector: Molex 51021-0200



      Notes :

      1. This product was developed & manufactured by WITHROBOT Co., LTD.
      2. Board schematics and firmware source code will NOT be publicly released.

      Hardkernel
      HK-BISCUIT

      Špecifické referencie

      Biscuit – Programmable Wi-Fi 9-Axis Absolute Orientation Sensor