• Novinka
    ESP32-S2 MCU WiFi Development Board, 240MHz, 2.4 GHz WiFi,  LCD (WS-20658) Pinout compatible with Raspberry Pi Pico
    ESP32-S2 MCU WiFi Development Board, 240MHz, 2.4 GHz WiFi,  LCD (WS-20658) Pinout compatible with Raspberry Pi Pico
    ESP32-S2 MCU WiFi Development Board, 240MHz, 2.4 GHz WiFi,  LCD (WS-20658) Pinout compatible with Raspberry Pi Pico

    ESP32-S2 MCU WiFi Development Board, 240MHz, 2.4 GHz WiFi, LCD (WS-20658) Pinout compatible with Raspberry Pi Pico

    WS-20658
    17,88 €

    14.90 € bez DPH

    ESP32-S2 MCU WiFi Development Board, 240MHz, 2.4 GHz WiFi,  LCD (WS-20658) Pinout compatible with Raspberry Pi Pico

    Množstvo:
    OUT OF STOCK

    ESP32-S2 MCU WiFi Development Board, 240MHz, 2.4 GHz WiFi,  LCD (WS-20658) Pinout compatible with Raspberry Pi Pico

    2.4 GHz WiFi Development Board Based On Microcontroller ESP32-S2, 240MHz

    ESP32-S2 WiFi Development Board

    240 MHz Xtensa single-core 32-bit LX7 microcontroller

    For C/C++ SDK, MicroPython, CircuitPython Development

    ESP32-S2-Pico-details-1.jpg
    Ordering Information

    Optional LCD / Pinheader

    ESP32-S2-Pico-details-3.jpg
    Board Specifications

    This is a WiFi development board with compact size, plenty peripheral interfaces, integrated low-power Wi-Fi System-on-Chip (SoC) and mass memory, supporting Raspberry Pi Pico expansion board ecosystem. Equipped with hardware crypto accelerator, RNG, HMAC and Digital Signature module, it can meet the security requirements of the Internet of Things. Multiple low-power operating states to satisfy power requirements in IoT, mobile devices, wearable electronics, smart home and other application scenarios, etc. 

    ESP32-S2 Standard Ver. key features include:

    • Support Raspberry Pi Pico expansion board ecosystem to satisfy creative IoT application development
    • Xtensa single-core 32-bit LX7 microprocessor, ESP32-S2FH4, support clock frequency up to 240 MHz
    • Integrated 320KB SRAM, 128KB ROM, 8MB PSRAM, 4MB Flash memory
    • Support IEEE802.11 b/g/n, on-board 2.4 GHz WiFi ceramic antenna, up to 150 Mbps data transfer rate
    • USB-C connector, no more plug orientation problem
    • On-chip integrated full-speed USB OTG interface, LCD interface (8-bit serial RGB/8080/6800), TWAI controller (ISO11898-1 compatible), capacitive sensor GPIO, temperature sensor and RMT (TX/RX)
    • On-board 1.8A current high efficiency boost/buck DC-DC TPS63000 power supply IC
    • Support a variety of low-power operating states for adjusting the optimal balance between communication distance, data rate and power consumption, to meet the power requirements of various application scenarios
    • Castellated module allows soldering direct to user-designed carrier boards

    ESP32-S2 LCD Ver. key features include:

    • All features of the ESP32-S2 Standard Ver.
    • On-board 0.96inch 160×80 pixels 65K color IPS LCD display
    • On-board single 3.7V lithium battery charge/discharge header, suitable for mobile IoT product design
    C/C++, MicroPython, CircuitPython Support

    Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started

    ESP32-S2-Pico-details-5.jpg
    240 MHz High Frequency Processor

    Xtensa Single-Core 32-Bit LX7 Microprocessor, Up To 240 MHz Frequency

    ESP32-S2-Pico-details-7.jpg
    26 × Multi-Function GPIO Pins

    Configurable Pin Function, Allows Flexible Development And Integration

    ESP32-S2 Standard Ver. Pinout

    ESP32-S2-Pico-details-9-1.jpg

    ESP32-S2 LCD Ver. Pinout

    ESP32-S2-Pico-details-9-2.jpg
    What's On Board

    ESP32-S2 Standard Ver. Resources

    ESP32-S2-Pico-details-intro-1.jpg
    1. ESP32-S2FH4
      Xtensa single-core 32-bit LX7 microprocessor
    2. APS6404L-3SQR-SN 
      8MB PSRAM
    3. BOOT button
      BOOT button, press BOOT and then RESET button to enter download mode
    4. RESET button
    5. TPS63000DRCR
      high efficiency DC-DC buck-boost chip
     
    1. LED
      user LED (not power indicator)
    2. USB Type-C connector
      for programming, serial printing, etc.
    3. Pinout
      compatible with Raspberry Pi Pico
    4. USB test points
      connecting to USB interface
    5. BOOT test point
      connecting to BOOT button
    6. WiFi ceramic antenna

    ESP32-S2 LCD Ver. Resources

    ESP32-S2-Pico-details-intro-2.jpg
    1. ESP32-S2FH4
      Xtensa single-core 32-bit LX7 microprocessor
    2. APS6404L-3SQR-SN 
      8MB PSRAM
    3. TPS63000DRCR
      high efficiency DC-DC buck-boost chip
    4. ETA6096
      high efficiency Lithium battery recharge manager
    5. Battery header
      MX1.25 header, for 3.7V Lithium battery charging/discharging
     
    1. WiFi ceramic antenna
    2. Pinout
      compatible with Raspberry Pi Pico
    3. USB Type-C connector
      for programming, serial printing, etc.
    4. BOOT button
      BOOT button, press BOOT and then RESET button to enter download mode
    5. RESET button
    6. 0.96inch IPS LCD
      160×80 resolution, 65K colors


    Various Pico Expansion Boards Support
    ESP32-S2-Pico-details-11.png

    * for more compatible modules, please check here

    Outline Dimensions
    ESP32-S2-Pico-details-size.jpg
    Resources & Services
    res_banner.png
    res_content.png
    Waveshare Electronics
    WS-20658

    Špecifické referencie

    ESP32-S2 MCU WiFi Development Board, 240MHz, 2.4 GHz WiFi, LCD (WS-20658) Pinout compatible with Raspberry Pi Pico

    17,88 €

    14.90 € bez DPH