WS-14226 (2.13inch e-Paper C)

Nový produkt

E-Ink display 212x104, 2.13inch HAT for Raspberry Pi, yellow/black/white three-color (WS-14226)

s DPH

22,44 € s DPH
18,70 € bez DPH

E-Ink display 212x104, 2.13inch  HAT for Raspberry Pi, yellow/black/white three-color (WS-14226)

DESCRIPTION

212x104, 2.13inch E-Ink display HAT for Raspberry Pi, yellow/black/white three-color, SPI interface

Overview

This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports yellow, black, and white three-color display.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

2.13inch e-Paper HAT (C) Features

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi 2B/3B/Zero/Zero W
  • Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

2.13inch e-Paper HAT (C) Specifications

  • Operating voltage: 3.3V
  • Interface: 3-wire SPI, 4-wire SPI
  • Outline dimension: 65mm × 30.2mm
  • Display size: 23.71mm × 48.55mm
  • Dot pitch: 0.229 × 0.228
  • Resolution: 212 × 104
  • Display color: yellow, black, white
  • Grey level: 2
  • Full refresh time: 15s
  • Refresh power: 26.4mW(typ.)
  • Standby power: <0.017mW
  • Viewing angle: >170°

Interface

SYMBOLDESCRIPTION
VCC3.3V
GNDGround
NCNC
DINSPI MOSI pin
CLKSPI SCK pin
CSSPI chip selection, low active
DCData/Command selection (high for data, low for command)
RSTExternal reset, low active
BUSYBusy status output, low active

Dimensions

2.13inch e-Paper HAT (C) dimensions

Development Resources

Wiki : www.waveshare.com/wiki/2.13inch_e-Paper_HAT_(C)

Selection Guide

Part NumberColorsGrey LevelResolutionDisplay size (mm)Outline Dimension (mm)Full Refresh Time (s)Partial Refresh Time (s)InterfacePi Header1
1.54inch e-Paper Moduleblack, white2200x20027.60 × 27.6048.0 × 33.020.3SPI×
1.54inch e-Paper Module (B)red, black, white2200x20027.60 × 27.6048.0 × 33.08N/ASPI×
1.54inch e-Paper Module (C)yellow, black, white2152x15227.51 × 27.5148.0 × 33.027N/ASPI×
2.13inch e-Paper HATblack, white2250x12248.55 × 23.7165.0 × 30.220.3SPI
2.13inch e-Paper HAT (B)red, black, white2212x10448.55 × 23.7165.0 × 30.215N/ASPI
2.13inch e-Paper HAT (C)yellow, black, white2212x10448.55 × 23.7165.0 × 30.215N/ASPI
2.7inch e-Paper HATblack, white2264x17657.29 × 38.1985.0 × 56.06N/ASPI
2.7inch e-Paper HAT (B)red, black, white2264x17657.29 × 38.1985.0 × 56.015N/ASPI
2.9inch e-Paper Moduleblack, white2296x12866.89 × 29.0589.5 × 38.020.3SPI×
2.9inch e-Paper Module (B)red, black, white2296x12866.89 × 29.0589.5 × 38.015N/ASPI×
2.9inch e-Paper Module (C)yellow, black, white2296x12866.89 × 29.0589.5 × 38.015N/ASPI×
4.2inch e-Paper Moduleblack, white2400x30084.80 × 63.60103.0 × 78.54N/ASPI×
4.2inch e-Paper Module (B)red, black, white2400x30084.80 × 63.60103.0 × 78.515N/ASPI×
4.2inch e-Paper Module (C)yellow, black, white2400x30084.80 × 63.60103.0 × 78.515N/ASPI×
4.3inch e-Paper UART Moduleblack, white4800x60088.00 × 66.00118.0 × 75.01.5N/AUART×
7.5inch e-Paper HATblack, white2640x384163.20 × 97.92170.2 × 111.26N/ASPI
7.5inch e-Paper HAT (B)red, black, white2640x384163.20 × 97.92170.2 × 111.231N/ASPI
7.5inch e-Paper HAT (C)yellow, black, white2640x384163.20 × 97.92170.2 × 111.231N/ASPI
  1. Standard Raspberry Pi header on module, allowed to be attached onto Pi directly, compatible with Raspberry Pi 2B/3B/Zero/Zero W

e-Paper raw panels comparing

30 iných produktov v tejto kategórií: