Raspberry Pi 3 Model B 1GB  (Quad Core 1.2GHz Broadcom BCM2837 64bit CPU,1GB RAM,BCM43143 WiFi,BLE)
      Raspberry Pi 3 Model B 1GB  (Quad Core 1.2GHz Broadcom BCM2837 64bit CPU,1GB RAM,BCM43143 WiFi,BLE)
      Raspberry Pi 3 Model B 1GB  (Quad Core 1.2GHz Broadcom BCM2837 64bit CPU,1GB RAM,BCM43143 WiFi,BLE)
      Raspberry Pi 3 Model B 1GB  (Quad Core 1.2GHz Broadcom BCM2837 64bit CPU,1GB RAM,BCM43143 WiFi,BLE)

      Raspberry Pi 3 Model B 1GB (Quad Core 1.2GHz Broadcom BCM2837 64bit CPU,1GB RAM,BCM43143 WiFi,BLE)

      RASPBERRYPI3-MODB-1GB (RPI3)

      Raspberry Pi 3 Model B 1GB  (Quad Core 1.2GHz Broadcom BCM2837 64bit CPU,1GB RAM,BCM43143 WiFi,BLE)

      Množstvo:

      Raspberry Pi 3 Model B 1GB  (Quad Core 1.2GHz Broadcom BCM2837 64bit CPU,1GB RAM,BCM43143 WiFi,BLE)

      Popis

      Miniatúrna základná doska založená na platforme ARM. Procesor 1.2GHz 64-bit quad-core ARM Cortex-A53 CPU, 4 jadrový grafický čip, 1GB RAM, 10/100 MBit Ethernet, Integrované 802.11n wireless LAN and Bluetooth 4.1, HDMI výstup, Kompozitný výstup, 4x USB 2.0, slot na microSD kartu. Napájanie cez micro USB port. Zariadenia bootuje OS z microSD karty, voľne k dispozícii sú rôzne Linuxové distribúcie, Raspbian, Windows 10 IoT Core, OpenELEC, OSMC, Pidora, Arch Linux, RISC OS a ine.  http://www.raspberrypi.org/

      Description

      The Raspberry Pi 3 Model B builds upon the features of its predecessors with a new, faster processor on board to increase its speed. It also features WiFi and Bluetooth Low Energy capabilities to enhance the functionality and the ability to power more powerful devices over the USB ports.
      • Quad Core 1.2GHz Broadcom BCM2837 64bit CPU
      • 1GB RAM
      • BCM43143 WiFi and Bluetooth Low Energy (BLE) on board
      • 40-pin Extended GPIO
      • 4x USB 2 ports
      • 4 Pole stereo output and composite video port
      • Full size HDMI
      • CSI camera port for connecting a Raspberry Pi camera
      • DSI display port for connecting a Raspberry Pi touchscreen display
      • Micro SD port for loading your operating system and storing data
      • 2525226
      • 2525225

      BCM2837, BCM43438 AND RASPBERRY PI 3

      For Raspberry Pi 3, Broadcom have supported us with a new SoC, BCM2837. This retains the same basic architecture as its predecessors BCM2835 and BCM2836, so all those projects and tutorials which rely on the precise details of the Raspberry Pi hardware will continue to work. The 900MHz 32-bit quad-core ARM Cortex-A7 CPU complex has been replaced by a custom-hardened 1.2GHz 64-bit quad-core ARM Cortex-A53. Combining a 33% increase in clock speed with various architectural enhancements, this provides a 50-60% increase in performance in 32-bit mode versus Raspberry Pi 2, or roughly a factor of ten over the original Raspberry Pi.

      James Adams spent the second half of 2015 designing a series of prototypes, incorporating BCM2837 alongside the BCM43438 wireless “combo” chip. He was able to fit the wireless functionality into very nearly the same form-factor as the Raspberry Pi 1 Model B+ and Raspberry Pi 2 Model B; the only change is to the position of the LEDs, which have moved to the other side of the SD card socket to make room for the antenna. Roger Thornton ran the extensive (and expensive) wireless conformance campaign, allowing us to launch in almost all countries simultaneously. Phil Elwell developed the wireless LAN and Bluetooth software.

      All of the connectors are in the same place and have the same functionality, and the board can still be run from a 5V micro-USB power adapter. This time round, we’re recommending a 2.5A adapter if you want to connect power-hungry USB devices to the Raspberry Pi.

      You’ll need a recent NOOBS or Raspbian image from our downloads page. At launch, we are using the same 32-bit Raspbian userland that we use on other Raspberry Pi devices; over the next few months we will investigate whether there is value in moving to 64-bit mode.

      Features:

      • Broadcom BCM2837 64bit ARM Cortex-A53 Quad Core Processor SoC running @ 1.2GHz
      • 1 GB RAM
      • 4 x USB2.0 Ports with up to 1.2A output
      • Expanded 40-pin GPIO Header
      • Video/Audio Out via 4-pole 3.5mm connector, HDMI, CSI camera, or Raw LCD (DSI)
      • Storage: microSD
      • 10/100 Ethernet (RJ45)
      • BCM43143 WiFi on board 802.11n wireless LAN
      • Bluetooth Low Energy (BLE) on board (Bluetooth 4.1)
        • 27 x GPIO
        • UART
        • I2C bus
        • SPI bus with two chip selects
        • +3.3V
        • +5V
        • Ground
      • Power Requirements: 5V @ 2.4 A via microUSB power source
      • Supports Raspbian, Windows 10 IoT Core, OpenELEC, OSMC, Pidora, Arch Linux, RISC OS and More!
        • Complete compatibility with Raspberry Pi 1 and 2

      Raspberry Pi Zero vs Rpi2 vs Rpi 3 power consumption

      Documents:

      Raspberry Pi
      RASPBERRYPI3-MODB-1GB (RPI3)

      Špecifické referencie

      upc
      2525225
      ean13
      640522710850

      Mohlo by vás zaujať aj

      Raspberry Pi 3 Model B (Quad Core 1.2GHz Broadcom BCM2837 64bit CPU,1GB RAM,BCM43143 WiFi,Bluetooth BLE)

      Raspberry Pi 3 Model B 1GB (Quad Core 1.2GHz Broadcom BCM2837 64bit CPU,1GB RAM,BCM43143 WiFi,BLE)