Raspberry Pi 5MP Spy Camera Board 30cm (PIS-1690) Pi Supply 

The Pi Supply Spy Camera for Raspberry Pi is the size of a cell phone camera (8.5mm x 11.3mm) and perfect for any Raspberry Pi project that's tight on space. It has a stick-on back, making it easy to mount on a wall, window, etc.

Attached to a 289mm (11.4") long cable, you can easily extend and mount your Raspberry Pi project away from the camera. Just like the official Raspberry Pi Camera Board, the Pi Supply Spy Camera connects to your Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data. The camera is connected to the BCM2835 processor on the Pi via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor. This bus travels along the ribbon cable that attaches the camera board to the Pi. The sensor itself has a native resolution of 5 megapixel, and has a fixed focus lens onboard. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.

CSI camera port works with Raspberry Pi Zero or Zero W

• Sensor: OV5647, 5MP 2592x1944 pixels
• Pin: 22
• Peach: 0.5mm
• AVDD: 2.7-3.3V (Typical2.8V)
• DVDD: 1.45-1.8V
• DOVDD: 1.7-3.3V
• Lens Structure: 4P (650nm)
• EFL: 3.52
• FNO: 2.8
• FOV: 70 degree
• Output Format: YUV or RAW RGB
• 1080p video at 30 FPS (or 60 FPS at 720p, 90 FPS at 480p)
• F2.9 lens, 3.4 mm focal length
• 53.50 degrees horizontal / 41.41 degrees vertical field of view
• Approx. dimensions of circuit and camera: 60 x 11.5 x 4.5mm