PSoCprog2 **END-OF-LIFE** (MIKROE-33)
      PSoCprog2 **END-OF-LIFE** (MIKROE-33)

      PSoCprog2 **END-OF-LIFE** (MIKROE-33)

      PSoCprog2

      PSoCprog2 (MIKROELEKTRONIKA)

      Quantity :

      Overview

       

      PSoCprog2 is a fast USB In-Circuit Serial Programmer 2.0 ICSP for PSoC microcontrollers.

       

      Very fast, on-board USB 2.0 programmer with a simplified driver installation.

       

      The programmer is specifically designed for In-Circuit Serial Programming (ICSP).

      Description

      When connected to a prototype device, the PSoCprog2 programmer becomes IN-SYSTEM programmer.

      With ZIF socket, it becomes a standard programmer used for a large-scale production.

      One of the possible ways of connecting PSoCprog2 to a microcontroller is via the IDC10 connector. Refer to figure on the right. You just have to place a 2x5 connector between the microcontroller and other on-board components. By embedding the PSoCprog2 connector you will be able to perform the PSoC In-System programming.

      A flat cable provided on the programmer ends with an IDC10 female connector. When creating a target device, the appropriate 10-pin male connector with 2.54 mm spacing between pins should be placed on it. The connector pins should be connected to the microcontroller pins. Their position varies depending on the microcontroller's type and package.

       

      Download Data Sheet

      MIKROELEKTRONIKA
      PSoCprog2

      Specific References

      ean13
      8606015071992
      PSoCprog2 (MIKROELEKTRONIKA)

      PSoCprog2 **END-OF-LIFE** (MIKROE-33)