USB3.0 to SATA Bridge Board (Hardkernel)  SSD / HDD to ODROID-XU4 

Boostyour ODROID-XU4 to the next level of storage performance with SSD or HDD. 

USB3.0 to SATA Bridge Board contains a USB3.0 to SATA3 controller (Genesis GL3321G) allowing interfacing of a single 2.5" SATA HDD/SDD. 
USB3.0 to SATA Bridge Board offers data and power to the storage.

• Dimension : 48 x 29 x 6 mm (approx., including connector)
• Interface : Micro-USB3.0
• Connector : Compatible with 2.5inch SATA HDD / SSD
• Control IC : GL3321G2
• Schematics : DOWNLOAD

An SSD write and read tests with ODROID-XU4 Linux platform in the real world USB 3.0.

Write test
dd if=/dev/zero of=test oflag=direct bs=4M count=256
256+0 records in
256+0 records out
1073741824 bytes (1.1 GB) copied, 8.3077 s, 132.4 MB/s

Read test
dd if=test of=/dev/null iflag=direct bs=4M
256+0 records in
256+0 records out
1073741824 bytes (1.1 GB) copied, 7.4352 s, 144 MB/s


An SSD write and read tests with ODROID-C1 Linux platform in the real world USB 2.0.

Write test
dd if=/dev/zero of=test oflag=direct bs=4M count=256
256+0 records in
256+0 records out
1073741824 bytes (1.1 GB) copied, 30.8774 s, 34.8 MB/s

Read test
dd if=test of=/dev/null iflag=direct bs=4M
256+0 records in
256+0 records out
1073741824 bytes (1.1 GB) copied, 28.6036 s, 37.5 MB/s

PACKAGE INCLUDES

• USB3.0 to SATA Bridge Board
  
• Micro-USB3.0 Cable (400mm approx.)
  
• 4 x Black rubber rings (it is necessary when you install a HDD/SDD into the VuShell for VU7.)