VM800P43A-BK (FTDI) PLUS Board - 4.3 TFT display, Bezel mount.Kit, BK

The VM800P 'Plus' is the latest in the series of EVE Development modules and further extends system integration by providing a comprehensive, fully integrated, ready to use development system, designed to provide engineers with everything necessary to create quality HMI solutions with display, audio and touch functionality.

This completely Arduino-compatible module features an FT800 chip for three in one operation (display, audio and touch) and its FT232R USB UART interface IC for MCU programming and communications, controlled from an inbuilt ATMEGA328P microcontroller operating at 5V/16MHz. Programming and configuration is easily achieved via the Arduino IDE, using a pre-programmed Arduino-compatible bootloader.

The development system offers a hi-quality system with an elegantly designed, precision fit bezel that provides a resistive touch panel sensor and component board in a rugged, plastic enclosure. Offered in black (-BK) or pearl (-PL) colours, the device provides the engineer a low priced option which can shorten development time while enabling a production finished look for 3.5", 4.3" or 5" colour TFT display solutions.

An abundance of enhanced features are included in the 'Plus' module: a backlit LED driver, inbuilt audio amplifier and micro-speaker, Real Time Clock (RTC) with battery backup, on-board 3.3v/5v level shifters, e-Flash IC build option, and a Micro-SD Card socket for application store plus 4GB SD card pre-loaded with 11 interactive application demonstrations and one library of free running apps, showcasing just a few examples of what this innovative device, designed primarily for industrial and commercial purpose, could be used for. The Arduino-compatible display system development platforms run off a standard 5V,delivered via a micro-USB or an auxiliary power connector. Furthermore, Micro-MaTch miniature connectors are provided to further extend functionality, and plug in card connectors are available to expand the IO capability to include GPIO, RS232, RS422, RS485 and Ethernet, promoting improved connectivity and the ability to transmit over longer distances.

For more information, please click here for the Press Release or click here to access the Datasheet

 

A complete listing of technical documentation is provided below. Due to the size of the documents and Sample Application software environment, FTDI Chip recommends that purchasers of a VM800P development system, first acquaint themselves with the DS_VM800P and DS_FT800 datasheets, after which familiarity with EVE's pseudo language found in the Programming Guide is advised. The remaining documents and Sample Application software have been developed with an orientation toward system and design implementation.

• VM800P Datasheet
• FT800 Programmers Guide
• FT800 Sample Application
• AN_240 FT800 From the Ground Up
• AN_246 VM800CB_SampleApp_Arduino_Introduction
• AN_252 FT800 Audio Primer
• AN_318 Arduino Library for FT800 Series
• Arduino Library v1.2.0
• VA800A PROG - VM800P Programmer Datasheet

 

FTDI Chip supports two programming solutions for the VM800P module, the HAL and the Arduino libraries. The architecture of both development systems can be seen within the block diagrams below:
The first diagram portrays a sample application using the HAL structure, which is further detailed in Application Note 246 - VM800CB_SampleApp_Arduino_Introduction. The sample application is designed to easily port to numerous MCUs over SPI by introducing one generic Hardware Abstraction Layer (HAL), which can then be used as a guideline for other platforms. Alternatively, by utilising the Arduino library as outlined in Application Note 318 - Arduino_Library_For_FT800_Series the engineer benefits from dedicated library support and examples, and can operate over the popular and easy to use Arduino IDE, using a pre-programmed Arduino Bootloader.