Zigbee 3.0 USB Dongle (IM9888010100045)

ZigBee 3.0 USB Dongle is pre-flashed with the Silicon Labs Zigbee stack from their EmberZNet 6.7.8 SDK as the application firmware, which means that it can be used out of the box as a ZigBee coordinator on Home Assistant and openHAB.

 

ZigBee 3.0 USB Dongle use EFR32MG21 as the ZigBee chip, pre-flashed with the Silicon Labs Zigbee stack from their EmberZNet 6.7.8 SDK as the application firmware, 
with EZSP interface activated plus their standard Gecko bootloader for possible recovery with serial interfaces. 

It works with Home Assistant and openHAB straight out of the box. Meanwhile, for the OTA flash alternative, we provide the NCP firmware based on EmberZNet 6.5.5 SDK. 
Firmware address:
https://github.com/xsp1989/zigbeeFirmware/tree/master/firmware/Zigbee3.0_Dongle

The Elelabs EZSP Firmware Upgrade Utility can be used to flash the firmware to a newer or older version. 
https://github.com/Elelabs/elelabs-zigbee-ezsp-utility/

 

Products	Descriptions	Purchase Links
BASICZBR3	DIY smart switch	https://www.itead.cc/sonoff-basiczbr3.html
S31 Lite zb	US type smart plug	https://www.itead.cc/sonoff-s31-lite-zb.html
SNZB01	Wireless switch	https://www.itead.cc/sonoff-snzb-01-zigbee-wireless-switch.html
SNZB02	Temperature & Humidity sensor	https://www.itead.cc/sonoff-snzb-02-zigbee-temperature-and-humidity-sensor.html
SNZB03	Motion sensor	https://www.itead.cc/sonoff-snzb-03-zigbee-motion-sensor.html
SNZB04	Door/Window sensor	https://www.itead.cc/sonoff-snzb-04-zigbee-wireless-door-window-sensor.html
ZBMINI	Mini smart switch	https://www.itead.cc/sonoff-zbmini-zigbee-smart-switch.html