CC2530 Eval Kit (Waveshare) ZigBee development/evaluation kit for CC2530F256

Overview

CC2530 Eval Kit is a ZigBee development/evaluation kit designed for CC2530F256, consists of the mother board ZB502 and the ZigBee moduleCore2530.

ZB502 Features

• Onboard battery holder, multi power supplies are available
• All the IOs are accessible for easy expansion
• Integrates CP2102 for debugging
• LEDs and user keys

What's on the ZB502

1. ZigBee module connector: for easily connecting ZigBee modules
2. I/Os interface
3. USB interface
4. UART/SPI interface
5. ONE-WIRE interface
6. Debugging interface
7. 5V/3.3V power input/output: usually used as power output, also common-grounding with other user board
8. CP2102
9. AMS1117-3.3
10. Power switch
11. Serial port RX/TX indicator
12. Power indicator
13. User LEDs
14. User keys
15. Reset button
16. UART0 jumper
17. LED jumper
18. KEY jumper

Core2530 Features

• As easy to use as any UART modules
• Preloaded Bootloader, supports programming via UART directly without any debugger
• Provided firmware: Coordinator and/or Router(preloaded by default)
• Supports configuring via upper computer software
• Auto networking (at least 1 Coordinator and 1 Router are required)

Core2530 Specifications

• Onboard chip: CC2530F256RHAR
• Communication distance (open and wide operating environment):
  • Absolute maximum: over 350 meters
  • Stable communication: over 250 meters
  • Auto connecting: over 120 meters
• Frequency range: 2.4GHz
• Wide supply-voltage range (2 V–3.6 V)
• Operating temperature: -40℃ ～ 85℃
• Serial port baud rate: 38400bps (default), different baud rates are available by software configuration
• Dimension: 26mm x 27mm (PCB)
• Expansion pinheader: all the I/Os
• Pinheader pitch: 2.54mm
• Spacing between pinheaders on the left side and the right side: 22.86mm (9x2.54mm)
• Antenna: 2.4G 2DB 360° omni-directional

CC2530F256RHAR Features

• Frequency range: 2.4GHz
• 16 transfer chains, software configurable according to environmental conditions
• Radio baud rate up to 250kbps
• High-Performance and Low-Power 8051 microcontroller core with code prefetch
• 2.4-GHz IEEE 802.15.4 compliant RF transceiver
• Wide supply-voltage range (2 V–3.6 V)
• Watchdog timer, battery monitor, and temperature sensor
• 12-Bit ADC with 8 channels and configurable resolution
• 2 powerful USARTs with support for several serial protocols
• IR generation circuitry
• General-Purpose timers (One 16-Bit, Two 8-Bit)
• AES security coprocessor
• 21 General-Purpose I/O pins (19 × 4 mA, 2 × 20 mA)

Downloads

Development resources: demo codes, schematic, datasheets, etc.
Wiki: www.waveshare.com/wiki/CC2530_Eval_Kit

PACKAGE CONTENT :

1. ZB502 x 1
2. Core2530 x 1
3. Antenna x 1
4. USB type A to Mini-B cable x 1
5. 4-pin 2-pin wires pack x 1

1

2

3

4

5