Sipeed Longan Nano - RISC-V GD32VF103CBT6 Development Board (SE-102991302)
Longan Nano is a development board based on GD32VF103CBT6 MCU with RISC-V 32-bit core of GigaDevice. Longan Nano sold by Seeed comes with a 0.96inch 160x80 IPS RGB LCD and an acrylic transparent case.
Sipeed Longan Nano is a development board based on GD32VF103CBT6 MCU with RISC-V 32-bit core of GigaDevice. It is convenient for students, engineers and geek enthusiasts to contact the new-generation RISC-V processor. Longan Nano sold by Seeed comes with a 0.96inch 160x80 IPS RGB LCD and an acrylic transparent case. GD32VF103CBT6 is a Bumblebee core based on Nuclei System Technology. Support RV32IMAC instruction set and ECLIC fast interrupt function. Core power consumption is only 1/3 of that of traditional Cortex-M3. Longan Nano development board, double-row pin layout design, needle spacing 700 mil, can be inserted directly into breadboard; on-board 8M passive crystal oscillator, 32.768 KHz RTC low-speed crystal oscillator, Mini TF slot, and use Type-C USB interface. Longan Nano supports multiple download methods: USB DFU download, UART ISP download, JTAG download. In the USB DFU download mode, you only need a USB Type-C cable to download the program to the development board. At the same time, Longan Nano supports the standard JTAG interface, which can be debugged online using the in-store RISC-V debugger or any JTAG-enabled debugger such as J-Link.
Meanwhile, Sipeed has adapted the PlatformIO IDE for the Longan Nano development board, which can be visually developed on multiple platforms such as Windows/Linux: https://github.com/sipeed/platform-gd32v
Features
- Chip built-in 128KB Flash, 32KB SRAM
- 4 x general purpose 16-bit timer, 2 x basic 16-bit timer, 1 x advanced 16-bit timer
- Watchdog, RTC, Systick
- 3 x USART, 2 x I2C, 3 x SPI, 2 x I2S, 2 x CAN, 1 x USBFS (OTG)
- 2 x ADC (10 channel), 2 x DAC
SPECIFICATION |
---|
CPU |
GD32VF103CBT6 based on RISC-V 32-bit core |
Kernel power consumption |
Only 1/3 of the traditional Cortex-M3 |
Chip built-in |
128KB Flash, 32KB SRAM |
Peripheral |
● 4 x general purpose 16-bit timer, 2 x basic 16-bit timer, 1 x advanced 16-bit timer ● Watchdog, RTC, Systick ● 3x USART, 2 x I2C, 3 x SPI, 2 x I2S, 2 x CAN, 1 x USBFS (OTG), ● 2 x ADC (10 channel), 2 x DAC |
SOFTWARE |
IDE |
PlatformIO IDE, Support debugging, Arduino |
Compile Toolchain & Debugger |
GCC, OpenOCD |
Operating system |
RT-Thread、LiteOS |
HARDWARE |
|
Storage expansion |
Short body TF card slot |
Display expansion |
8pin 0.5mm FPC Block Expansion 160x80 RGB IPS LCD (SPI Interface) |
Debug interface |
2x4 pin leads to JTAG debug interface |
Connector |
Double row 2.54 pitch pin |
Crystal |
8MHz Passive High Speed Crystal +32.768KHz Low Speed RTC Crystal |
Dimension
Part List
Part List |
---|
Sipeed Longan Nano Development Board |
x1 |
0.96inch 160x80 IPS RGB LCD |
x1 |
Acrylic transparent case |
x1 |