9.7inch E-Ink display 1200x825 HAT for Raspberry Pi (WS-15195) e-Paper HAT

1200x825, 9.7inch E-Ink display HAT for Raspberry Pi, IT8951 controller, USB/SPI/I80/I2C interface

Overview

This is an E-Ink display HAT for Raspberry Pi, 9.7inch, 1200x825 resolution, with embedded controller IT8951, communicating via USB/SPI/I80/I2C interface.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features

• No backlight, keeps displaying last content for a long time even when power down
• Low power consumption, basically power is only required for refreshing
• Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
• USB/SPI/I80/I2C interface, for connecting with host boards like Raspberry Pi/Nucleo, etc.
• Comes with development resources and manual (examples for Raspberry Pi/STM32)

Specifications

• Operating voltage: 5V
• Interface: USB/SPI/I80/I2C
• Outline dimension: 218.8mm × 156.425mm × 1.15mm
• Display size: 202.8mm × 139.425mm
• Dot pitch: 0.169 × 0.169
• Resolution: 1200 × 825
• Display color: black, white
• Gray scale: 2-16 (1-4 bit)
• Full refresh time: <1s
• Total refresh power: 0.6W(typ.)
• Total standby power: 0.3W(typ.)
• Viewing angle: >170°

SPI Pinouts

SYMBOL	DESCRIPTION
5V	Power input
GND	Ground
MISO	SPI MISO pin
MOSI	SPI MOSI pin
SCK	SPI SCK pin
CS	SPI chip selection, low active
RST	External reset, low active
HRDY	Busy status output, low active

e-Paper IT8951 Driver HAT Dimensions

Development Resources

Wiki : www.waveshare.com/wiki/9.7inch_e-Paper_HAT

Selection Guide

Part Number	Colors	Grey Level	Resolution	Display size (mm)	Outline Dimension (mm)	Full Refresh Time (s)	Partial Refresh Time (s)	Pi Header1	Interface
1.54inch e-Paper Module	black, white	2	200x200	27.60 × 27.60	48.0 × 33.0	2	0.3	×	SPI
1.54inch e-Paper Module (B)	red, black, white	2	200x200	27.60 × 27.60	48.0 × 33.0	8	N/A	×	SPI
1.54inch e-Paper Module (C)	yellow, black, white	2	152x152	27.51 × 27.51	48.0 × 33.0	27	N/A	×	SPI
2.13inch e-Paper HAT	black, white	2	250x122	48.55 × 23.71	65.0 × 30.2	2	0.3	√	SPI
2.13inch e-Paper HAT (B)	red, black, white	2	212x104	48.55 × 23.71	65.0 × 30.2	15	N/A	√	SPI
2.13inch e-Paper HAT (C)	yellow, black, white	2	212x104	48.55 × 23.71	65.0 × 30.2	15	N/A	√	SPI
2.13inch e-Paper HAT (D)	black, white	2	212x104	48.55 × 23.71	59.2 × 29.2	2	0.3	√	SPI
2.7inch e-Paper HAT	black, white	2	264x176	57.29 × 38.19	85.0 × 56.0	6	N/A	√	SPI
2.7inch e-Paper HAT (B)	red, black, white	2	264x176	57.29 × 38.19	85.0 × 56.0	15	N/A	√	SPI
2.9inch e-Paper Module	black, white	2	296x128	66.89 × 29.05	89.5 × 38.0	2	0.3	×	SPI
2.9inch e-Paper Module (B)	red, black, white	2	296x128	66.89 × 29.05	89.5 × 38.0	15	N/A	×	SPI
2.9inch e-Paper Module (C)	yellow, black, white	2	296x128	66.89 × 29.05	89.5 × 38.0	15	N/A	×	SPI
4.2inch e-Paper Module	black, white	2	400x300	84.80 × 63.60	103.0 × 78.5	4	N/A	×	SPI
4.2inch e-Paper Module (B)	red, black, white	2	400x300	84.80 × 63.60	103.0 × 78.5	15	N/A	×	SPI
4.2inch e-Paper Module (C)	yellow, black, white	2	400x300	84.80 × 63.60	103.0 × 78.5	15	N/A	×	SPI
4.3inch e-Paper UART Module	black, white	4	800x600	88.00 × 66.00	118.0 × 75.0	1.5	N/A	×	UART
5.83inch e-Paper HAT	black, white	2	600x448	118.8 × 88.26	125.4 × 99.5	3.5	N/A	√	SPI
5.83inch e-Paper HAT (B)	red, black, white	2	600x448	118.8 × 88.26	125.4 × 99.5	14	N/A	√	SPI
5.83inch e-Paper HAT (C)	yellow, black, white	2	600x448	118.8 × 88.26	125.4 × 99.5	26	N/A	√	SPI
7.5inch e-Paper HAT	black, white	2	640x384	163.20 × 97.92	170.2 × 111.2	6	N/A	√	SPI
7.5inch e-Paper HAT (B)	red, black, white	2	640x384	163.20 × 97.92	170.2 × 111.2	16	N/A	√	SPI
7.5inch e-Paper HAT (C)	yellow, black, white	2	640x384	163.20 × 97.92	170.2 × 111.2	16	N/A	√	SPI
9.7inch e-Paper HAT	black, white	16	1200x825	202.8 × 139.43	218.8×156.4	<1	0.3	√	USB/SPI/ I80/I2C

1. Standard Raspberry Pi header on module, allowed to be attached onto Pi directly, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+