FLIR Lepton 2.5 - Thermal Imaging Module (SF-SEN-16465)
      FLIR Lepton 2.5 - Thermal Imaging Module (SF-SEN-16465)

      FLIR Lepton 2.5 - Thermal Imaging Module (SF-SEN-16465)

      SF-SEN-16465
      €238.80

      199.00 € tax excl.

      FLIR Lepton 2.5 - Thermal Imaging Module (SF-SEN-16465)
      Quantity :
      OUT OF STOCK
      FLIR Lepton 2.5 - Thermal Imaging Module (SF-SEN-16465)

      The FLIR Lepton® 2.5 - Thermal Imaging Module is a radiometric-capable long wave infrared (LWIR) camera solution that is smaller than a dime, fits inside a smartphone, and is less expensive than traditional IR cameras. With a focal plane array of 80x60 active pixels, this Lepton easily integrates into native mobile-devices and other electronics as an IR sensor or thermal image sensor. The radiometric Lepton captures accurate, calibrated, and non-contact temperature data in every pixel.

      Features

      • Effective Frame Rate: 8.6 Hz (commercial application exportable)
      • Input Clock: 25-MHz nominal, CMOS IO Voltage Levels
      • Output Format: User-selectable 14-bit, 8-bit (AGC applied), or 24-bit RGB (AGC and colorization applied)
      • Pixel Size: 17 µm
      • Radiometric Accuracy: High gain: Greater of +/- 5°C or 5% (typical) Low gain: Greater of +/- 10°C or 10% (typical)
      • Scene Dynamic Range: -10-140 °C (high gain); up to 450°C (low gain) typical
      • Spectral Range: Longwave infrared, 8 µm to 14 µm
      • Temperature Compensation: Automatic. Output image independent of camera temperature.
      • Thermal Sensitivity: <50 mK (0.050° C)
      • Video Data Interface: Video over SPI
      • Control Port: CCI (I2C-like), CMOS IO Voltage Levels
      • Package Dimensions - Socket Version (w x l x h): 11.8 x 12.7 x 7.2 mm
      • Mechanical Interface: 32–pin socket interface to standard Molex® socket
      • Non-Operating Temperature Range: -40 °C to +80 °C
      • Optimum Temperature Range: -10°C to +80°C
      • Shock: 1500 G @ 0.4 ms
      • Array format: 80 × 60, progressive scan
      • FOV - Diagonal: 63.5°
      • FOV - Horizontal: 50° (nominal)
      • Image Optimization: Factory configured and fully automated
      • Non-Uniformity Correction (NUC): Automatic with shutter
      • Sensor Technology: Uncooled VOx microbolometer
      • Solar protection: Integral
      • Input Supply Voltage: 2.8 V, 1.2 V, 2.5 V to 3.1 V IO
      • Power Dissipation: 150 mW (operating), 650 mW (during shutter event), 4 mW (standby)
      Documents
      SparkFun
      SF-SEN-16465

      Specific References

      FLIR Lepton 2.5 - Thermal Imaging Module (SF-SEN-16465)

      €238.80

      199.00 € tax excl.