RASPBERRYPI-DISPLAY (2473872)  Raspberry Pi LCD 7" Display with 10 Finger Touch

The 7” Touch screen Monitor for Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects. The 800 x 480 display connects via an adapter board which handles power and signal conversion. Only two connections to the Pi are required; power from the Pi’s GPIO port and a ribbon cable that connects to the DSI port present on all Raspberry Pi’s. Touch screen drivers with support for 10-finger touch and an on-screen keyboard will be integrated into the latest Raspbian OS for full functionality without a physical keyboard or mouse.

• • 7” Touch screen Display.
• • Screen Dimensions: 194mm x 110mm x 20mm (including standoffs)
• • Viewable screen size: 155mm x 86mm
• • Screen Resolution 800 x 480 pixels
• • 10 finger capacitive touch. • Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port.
• • Adapter board is used to power the display and convert the parallel signals from the display to the serial (DSI) port on the RPi
• • Will require the latest version of Raspbian OS to operate correctly

Kit Contents

• • 7” Touch screen Display
• • Adapter Board • DSI Ribbon cable
• • 4 x stand-offs and screws (used to mount the adapter board and Raspberry Pi board to the back of the display
• • 4 x jumper wires (used to connect the power from the Adapter Board and the GPIO pins on the Pi so the 2Amp power is shared across both units)