This “Case Type 2” is designed for the user who needs high performance network with a minimal or regular range storages. Basically, this is the fanless design and the heated air from a processor can be blow out through the 92mm cooling fan hole on top of this enclosure. But you also can install a 92x92mm standard PC cooling fan (optional) at the hole if the decent power for the fan is supplied.

• Supported storages:

On-board eMMC 5.1 module

On-board M.2 NVMe (NGFF-2280)

• “SATA Data and Power Cable” must be purchased

• The disk drive mounting screws (M3x6mm) are included in the package.

• The power and reset switches are accessible through the hole at the front

• Optional power on/off switch (diameter 16mm) can be installed at the front panel

• 128 (L) x 132 (W) x 63 (H) mm

Package contents:

• A. Back panel

• B. Front panel

• C. Left panel

• D. Right panel

• E. Top panel

• F. Bottom panel

• G. 1 x 92mm Stainless Cooling Fan Grill

• H. 4 x 40mm (F) PCB Supports

• I. 4 x 15mm (M) PCB Supports

• J. 8 x 6mm M3 Truss Head Bolts

• K. 4 x M5 Nuts

• L. 4 x M5 Truss Head Bolts

• M. 4 x Rubber Feet (Round / Clear)

Optional accessory

• SATA Data and Power Cable
• LED Power Button
• 16Port I2C GPIO Board
• VESA Mount Kit
• 92x92x25mm DC 5V Cooling Fan

Mechanical drawings:

• https://dn.odroid.com/temp/box/ODROID-H2_TYPE2.dxf