ODROID-H2 Case Type 4 (Hardkernel) G181116640066
      ODROID-H2 Case Type 4 (Hardkernel) G181116640066

      ODROID-H2 Case Type 4 (Hardkernel) G181116640066

      HK-CASE4-H2
      €35.88

      29.90 € tax excl.

      ODROID-H2 Case Type 4 (Hardkernel) G181116640066

      Quantity :
      OUT OF STOCK

      ODROID-H2 Case Type 4 (Hardkernel) G181116640066

      Description:

      This “Case Type 4” is designed for the user who needs high bandwidth network with mid-range storages. Basically, this is the fanless design and the heated air from a processor or the storages – especially a hard disk drive with a spinning motor – can be blow out through the two 92mm holes  on top of the ODROID-H2 and the disk drives. But you also can install a 92x92mm standard PC cooling fan (optional) at a hole out of two on top of the ODROID-H2 if you supply the decent power for the fan.

      • Supported storages: Due to the physical limitation of the design, two different size of storages cannot be installed and below combination of the storage drives are supported.

      On-board eMMC 5.1 module

      On-board M.2 NVMe (NGFF-2280)

      Up to 1 x 3.5” SATA HDD or SSD

      Up to 2 x 2.5” SATA HDD or SSD (Max height : 15mm)

      • “SATA Data and Power Cable” must be purchased
      • The disk drive mounting screws (M3x6mm and #6-32x6mm) are included in the package.
      • The power and reset switches are accessible through the hole at the front
      • Optional power on/off switch (diameter 16mm) can be installed at the front
      • 209 (L) x 132 (W) x 106 (H) mm

       

      Package Contents:

      • A. Rear-top panel
      • B. Front panel
      • C. Rear-back panel
      • D. Rear panel
      • E. Front space filler
      • F. Bottom panel
      • G. 2.5”/3.5” inner drive bracket
      • H. Left panel
      • I. Right panel
      • J. Top panel
      • K. 1 x 92mm stainless cooling fan grill for front-top
      • L. 1 x 92mm stainless cooling fan grill for rear-top
      • M. 6 x 40mm (F) PCB Supports
      • N. 3 x 40mm (M) PCB Supports
      • O. 4 x 15mm (M) PCB Supports
      • P. 6 x 6mm #6-32 Round Head Screws
      • Q. 8 x M5 Truss Head Bolts
      • R. 20 x 6mm Truss Head Bolts
      • S. 8 x M5 Nuts
      • T.  4 x Rubber Feet (Round / Clear)

       

      Optional accessory:

      Mechanical drawings:

       

       

      Hardkernel
      HK-CASE4-H2

      Specific References

      ODROID-H2 Case Type 4 (Hardkernel) G181116640066

      ODROID-H2 Case Type 4 (Hardkernel) G181116640066

      €35.88

      29.90 € tax excl.