Pi USV (cw2.de) The Uninterrupted Power Supply solution for Raspberry Pi
      Pi USV (cw2.de) The Uninterrupted Power Supply solution for Raspberry Pi
      Pi USV (cw2.de) The Uninterrupted Power Supply solution for Raspberry Pi
      Pi USV (cw2.de) The Uninterrupted Power Supply solution for Raspberry Pi

      Pi USV (cw2.de) The Uninterrupted Power Supply solution for Raspberry Pi

      Pi USV (643624)

      Pi USV (cw2.de) The Uninterrupted Power Supply solution for Raspberry Pi

      Quantity :

      Pi USV (cw2.de) The Uninterrupted Power Supply solution for Raspberry Pi

      The Pi UPS is a voltage surge protection controller PCB for commercially available Raspberry Pi devices with a battery connection.
      The UPS is connected to the Raspberry using software provided by download.

      The Pi UPS developed by CW2. assures the operation of the Raspberry Pi through the connected batteries. It is connected to the raspberry via a GPIO port. In the event of a power failure, the Raspberry can either be shut down properly via the USB connection or it can continue to run. There is no data loss and no risk of harm to the system. The applications running on the Raspberry Pi are permanently protected. The battery status is controlled using the CW2. software provided.

      Application examples:
      • Automotive
      • Television
      • Monitoring

      Included with delivery:
      Pi UPS with bracket for 6 AA batteries
      Batteries not included

      The Pi UPS is compatible with the Beagleboard and Arduino.

      Technical data:

      General
      Classification according to IEC 62040-3: Tier 1, Class 3 (VFD) i.e. as soon as the primary fails, the UPS switches to battery power. A charging function is not available.
      • Primary voltage and battery voltage: UP = 5V (USB) => primary voltage: UP = 5V (USB)
      • Maximum battery voltage: U SinMax= 7.5 V. 25 V
      • Max power on battery power: I SoutMax= 1,000 mA
      • Pins for logical primary voltage and battery charge requests
      • Power supply to the Pi is via GPIO, therefore no connection to the Pi
      • Weight Pi UPS: 125 g
      • Dimensions: 55 mm wide x 40 mm deep x 20 mm high
      Connections
      • IN1: primary power supply via Micro-USB
      • In2: secondary power supply via press-stud connection
      GPIO port
      • P02 (+5V): Power supply for the Pi
      • P06 (GND): Power supply for the Pi
      • P11 (GPIO17, output): signal of Raspberry that it has started
      • P13 (GPIO27, input): Battery low or empty
      • P15 (GPIO22, input): Emergency operation, supply via secondary voltage
      Display
      • LED1: everything OK, normal status
      • LED2: emergency operation, supply via secondary voltage
      • LED3: battery low or empty

      Included with delivery:
      Pi UPS with bracket for 6 AA batteries
      Batteries not included
      Delivery does not include the Raspberry shown here 
      weight : 0.047 kg
       
      Raspberry Pi
      Pi USV (643624)

      Specific References

      Pi USV (cw2.de) The Uninterrupted Power Supply solution for Raspberry Pi

      Pi USV (cw2.de) The Uninterrupted Power Supply solution for Raspberry Pi