Waveshare RP2350-Plus Development Board 16MB, A Low-cost, High-performance Pico-like RP2350A (WS-29414)

• Pinheader option : with pre-soldered header
• Flash memory     : 16MB

Waveshare RP2350-Plus Development Board, A Low-cost, High-performance Pico-like MCU Board Based On Raspberry Pi RP2350A Dual-core & Dual-architecture Microcontroller

RP2350 MCU Board Plus

a Pico-like MCU board based on Raspberry Pi RP2350A

Compatible with most of the Raspberry Pi Pico add-on modules

Board specifications

• RP2350A microcontroller chip designed by Raspberry Pi in the United Kingdom
• Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz
• 520KB of SRAM, options for 4MB/16MB on-board Flash memory
• Type-C connector, keeps it up to date, easier to use
• Lithium battery recharge/discharge header, suitable for mobile devices
• Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip, maximum 2A load current
• Castellated module allows soldering directly to carrier boards
• USB 1.1 with device and host support
• Low-power sleep and dormant modes
• Drag-and-drop programming using mass storage over USB
• 26 × multi-function GPIO pins
• 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels
• Accurate clock and timer on-chip
• Temperature sensor
• Accelerated floating-point libraries on-chip
• 12 × Programmable I/O (PIO) state machines for custom peripheral support

Pinheader options

RP2350-Plus
without pinheader
(options for 4MB/16MB Flash memory)

 

RP2350-Plus-M
with pre-soldered pinheader
(options for 4MB/16MB Flash memory)

C/C++, MicroPython support

Comprehensive SDK, dev resources, tutorials to help you easily get started

dual-core, dual-architecture

Adopts dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz

26 × multi-function GPIO pins

configurable pin function, allows flexible development and integration

What's On Board

1. LED
   user LED (not power indicator)
2. USB Type-C connector
3. ETA6096
   high efficiency Lithium battery recharge manager
4. MP28164
   high efficiency DC-DC buck-boost chip
5. BOOT button
   press it when resetting to enter download mode
6. On-board flash memory
   4MB: W25Q32JVSSIQ
   16MB: W25Q128JVSIQ
7. RESET button

 

8. RP2350A
   Dual-core and dual-architecture design, up to 150 MHz operating frequency
9. Battery header
   MX1.25 header, for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time
10. Pinout
    compatible with Raspberry Pi Pico 2
11. USB test points
    connecting to USB interface
12. BOOT test point
    connecting to BOOT button
13. DEBUG points

outline dimensions

Resources & Services

Wiki: www.waveshare.com/wiki/RP2350-Plus