• Reduced price
5inch HDMI LCD (B) (Waveshare) 800×480 Resistive Touch Screen LCD, HDMI, supports various systems

5inch HDMI LCD (B) (Waveshare) 800×480 Resistive Touch Screen LCD, HDMI, supports various systems

Reference: WS-10737 (WS-5-HDMI-B)

€42.50
€27.63 Save 35%
Tax included
27.62 € tax excluded

5inch HDMI LCD (B) (Waveshare) 800×480 Resistive Touch Screen LCD, HDMI, supports various systems

Quantity

  • Secure shopping Secure shopping
  • Quick delivery Quick delivery
  • Help with buying Help with buying

5inch HDMI LCD (B) (Waveshare) 800×480 Resistive Touch Screen LCD, HDMI, supports various systems

  • 800x480, 5inch Resistive Touch Screen LCD, HDMI Interface, Supports Various Systems

Features

  • 800x480 high hardware resolution
  • Resistive touch control
  • Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers
    • When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free
    • When work as a computer monitor, supports Windows 10/8.1/8/7, single touch, and driver free
  • Backlight can be turned off to lower power consumption

Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately:
Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable
BB Black: HDMI cable

Photos

5inch-HDMI-LCD-B-1_180.jpg5inch-HDMI-LCD-B-2_180.jpg5inch-HDMI-LCD-B-3_180.jpg5inch-HDMI-LCD-B-4_180.jpg5inch-HDMI-LCD-B-5_180.jpg5inch-HDMI-LCD-B-6_180.jpg5inch-HDMI-LCD-B-7_180.jpg5inch-HDMI-LCD-B-8_180.jpg

External Dimension

5inch-HDMI-LCD-B-dimension

Development Resources

Wiki : www.waveshare.com/wiki/5inch_HDMI_LCD_(B)

FAQ

Why the LCD doesn't work with my Raspbian?
To use the LCD with the Raspberry Pi official image, driver (SPI touch interface only) should be installed first. Please refer to the user manual.
However, for the first testing, you may want to use our image directly (if provided).
Why the LCD still doesn't work with the Waveshare provided image?
Make sure the hardware connection is correct and connects fine.
Make sure the image in TF card is burnt correctly.
The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.
Which power supply should I use?
It is recommended to use a 5V/3A power adapter for the Raspberry Pi other than USB connection, otherwise the Pi may failed to start up because the PC's USB port might have not enough power.
For large size LCDs, say, 10inch diagonal or more, another stand-alone power adapter is also required to provide power to the LCD.

For more info, please check the wiki page.

Wiki : www.waveshare.com/wiki/5inch_HDMI_LCD_(B)

Package Contains

  1. 5inch HDMI LCD (B)  1x
  2. HDMI cable  1x
  3. Touch pen  1x
  4. USB type A plug to micro B plug cable  1x
  5. RPi LCD screws pack (4pcs)  1x
  6. DVD  1x
WS-10737 (WS-5-HDMI-B)

16 other products in the same category: