0.96inch OLED Display Module, 128×64 SPI / I2C (WS-24102) White
      0.96inch OLED Display Module, 128×64 SPI / I2C (WS-24102) White
      0.96inch OLED Display Module, 128×64 SPI / I2C (WS-24102) White
      0.96inch OLED Display Module, 128×64 SPI / I2C (WS-24102) White

      0.96inch OLED Display Module, 128×64 SPI / I2C (WS-24102) White

      WS-24102
      €6.68

      5.43 € tax excl.

      0.96inch OLED Display Module, 128×64 SPI / I2C (WS-24102) White

      Quantity :
      OUT OF STOCK

      0.96inch OLED Display Module, 128×64 SPI / I2C (WS-24102) White

      0.96inch OLED Display Module, 128×64 Resolution, SPI / I2C Communication

      0.96inch OLED Display Module

      Embedded SSD1315 Driver Chip, SPI / I2C Communication

      Comes with examples for Raspberry Pi, Arduino, STM32, etc. 

      0.96inch-OLED-Module-C-details-1.jpg 

        • SizeDimension.png0.96"
        • ResolutionResolution.png128×64
        • Display ColorColor-YB-W-B.pngyellow&blue(two blocks)
          /white/blue (optional)

      • InterfaceSPI_I2C_7PIN.pngSPI/I2C
      • Display PanelOLED.pngOLED
      • DriverDriver-IC.pngSSD1315

      Version Options
      0.96inch-OLED-Module-C-details-3.jpg 

      Features At A Glance
      • Ultra-narrow bezel, conpact size, with onboard voltage translator
      • Adopts 4-wire SPI and I2C interfaces, better compatibility, fast data rate
      • Comes with online development resources (examples for Raspberry Pi/Arduino/STM32)
      Specifications
      OPERATING VOLTAGE 3.3V / 5V DISPLAY PANEL OLED
      RESOLUTION 128 × 64 pixels PIXEL SIZE 0.15 × 0.15 mm
      COMMUNICATION INTERFACE 4-wire SPI / I2C DRIVER SSD1315
      DISPLAY SIZE 21.74 × 11.18 mm MODULE SIZE 26.00 × 26.00mm
      DISPLAY COLOR (C): upper yellow & lower blue; (D): white; (E): blue

      Control Interface
      0.96inch-OLED-Module-C-details-4.jpg
      RES Reset, low active
      DC Data/Command selection (high for data, low for command)
      CS Chip selection, low active
      CLK Clock input
      DIN Data input
      GND Ground
      VCC Power (3.3V / 5V input)

      Hardware Connection

      Connecting With Raspberry Pi Via SPI Interface

      0.96inch-OLED-Module-C-details-5.jpg

      Connecting With Arduino Board Via SPI Interface

      0.96inch-OLED-Module-C-details-7.jpg


      Usage Example
      0.96inch-OLED-Module-C-details-9.jpg

      for reference only, the STM32 board is NOT included.


      Product Show
      0.96inch-OLED-Module-C-details-11.jpg
      0.96inch-OLED-Module-C-details-13.jpg
      Outline Dimensions
      0.96inch-OLED-Module-C-details-size.jpg
      Resources & Services
      res_banner.png
      Wiki: www.waveshare.com/wiki/0.96inch_OLED_Module

      Balenie Obsahuje / Package Content

      1. 0.96inch OLED Module  1x
      2. Jumper cable female-female 7PIN  1x
      Waveshare Electronics
      WS-24102

      Specific References

      0.96inch OLED Display Module, 128×64 SPI / I2C (WS-24102) White

      0.96inch OLED Display Module, 128×64 SPI / I2C (WS-24102) White

      €6.68

      5.43 € tax excl.