Open429I-C Standard, STM32F4 Development Board (WS-9186) for STM32F429
      Open429I-C Standard, STM32F4 Development Board (WS-9186) for STM32F429

      Open429I-C Standard, STM32F4 Development Board (WS-9186) for STM32F429

      WS-9186
      €118.80

      99.00 € tax excl.

      Open429I-C Standard, STM32F4 Development Board (WS-9186) for STM32F429 

      Quantity :
      OUT OF STOCK

      Open429I-C Standard, STM32F4 Development Board (WS-9186) for STM32F429 

      STM32 development board designed for STM32F429I, features the STM32F429IGT6 MCU, and integrates various standard interfaces, pretty easy for peripheral expansions.

      STM32F429ZIT6 development board

      Overview

      Open429I-C is an STM32 development board designed for the STM32F429IGT6 microcontroller, consists of the mother board and the MCU core board Core429I.

      The Open429I-C supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with STM32 series microcontrollers.


      What's on the mother board

      STM32F429ZIT6 development board on board resource

      1. MCU core board connector: for easily connecting the Core429I
      2. USART3 interface: easily connects to RS232, RS485, USB TO 232, etc.
      3. DCMI interface: for connecting camera
      4. Capacitive touch panel interface: for connecting capacitive touch panel
      5. CAN2 interface: for connecting CAN modules
      6. CAN1 interface: for connecting CAN modules
      7. SDIO interface: for connecting Micro SD module, features much faster access speed rather than SPI
      8. ULPI interface: for connecting high-speed USB peripheral (the STM32F429I integrates USB HS controller without any PHY device)
      9. LCD interface 1: for connecting 7inch LCD
      10. ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc.
      11. LCD interface 2: for connecting 4.3inch LCD
      12. I2C2/I2C3 interface: easily connects to I2C peripherals such as I/O expander (PCF8574), EEPROM (AT24Cxx), etc.
      13. SAI1 interface: for connecting audio modules like UDA1380 module
      14. Ethernet interface: for connecting Ethernet modules
      15. USB connector: USB to UART via the onboard convertor PL2303
      16. SPI1/SPI2 interfaces:
        • easily connects to SPI peripherals such as DataFlash (AT45DBxx), SD card, MP3 module, etc.
        • easily connects to AD/DA modules (SPI1 features AD/DA alternative function)
      17. I2S2/I2S3/I2C1 interface: easily connects to I2S peripherals such as audio module, etc.
      18. 8-bit FMC interface: easily connects to peripherals such as NandFlash
      19. 5V DC jack
      20. 5V/3.3V power input/output: usually used as power output, also common-grounding with other user board
      21. MCU pins connector: all the MCU I/O ports are accessible on expansion connectors for further expansion
      22. PL2303: USB to UART convertor
      23. LEDs: convenient for indicating I/O status and/or program running state
      24. PL2303 TX-LED / RX-LED
      25. 12MHz crystal: for PL2303
      26. Joystick: five positions
      27. WAKE UP button: used as regular button, and/or wake up the STM32 MCU from sleep
      28. USB to UART jumper
      29. LED jumper
        • short the jumper to connect to default I/Os used in example code
        • open the jumper to connect to custom I/Os via jumper wires
      30. Button/Joystick jumper
        • short the jumper to connect to default I/Os used in example code
        • open the jumper to connect to custom I/Os via jumper wires

      What's on the Core429I

      STM32F429IGT6 development board on board resource

      1. STM32F429IGT6:the high performance STM32 MCU which features:
        • Core: Cortex-M4 32-bit RISC
        • Feature: single-cycle DSP instructions
        • Operating Frequency: 180MHz, 225 DMIPS/1.25 DMIPS/MHz
        • Operating Voltage: 1.8V-3.6V
        • Package: LQFP176
        • Memories: 1024kB Flash, 256+4kB SRAM
        • MCU communication Interfaces:
          • 6 x SPI, 4 x USART, 4 x UART, 2 x I2S, 1 x SAI, 3 x I2C
          • 1 x FMC, 1 x SDIO, 2 x CAN
          • 1 x LCD-TFT
          • 1 x USB 2.0 HS/FS controller (with dedicated DMA)
          • 1 x USB HS ULPI (external PHY required)
          • 1 x 10/100 Ethernet MAC
          • 1 x 8 to 14-bit camera interface
        • AD & DA converters: 3 x AD (12-bit, 1μs, shares 24 channels); 2 x DA (12-bit)
        • Debugging/Programming: supports JTAG/SWD interfaces, supports IAP
      2. IS42S16400J: SDRAM 1 Meg Bits x 16 Bits x 4 Banks (64-MBIT)
      3. AMS1117-3.3: 3.3V voltage regulator
      4. MIC2075: onboard USB power management device
      5. Power supply switch, powered from 5Vin or USB connection
      6. Boot mode selection, for configuring BOOT0 pin
      7. Power indicator
      8. VBUS LED
      9. Reset button
      10. 8M crystal
      11. 32.768K crystal, for internal RTC with calibration
      12. JTAG/SWD interface: for debugging/programming
      13. USB connector, supports Device and/or Host
      14. MCU pins expander, VCC, GND and all the I/O pins are accessible on expansion connectors for further expansion
      15. 5Vin pinheader, 5V power supply is required when using USB HOST/OTG
      16. USB OTG/HOST jumper
        • short the jumper when using USB OTG/HOST
        • open the jumper to disconnect from related I/O port
      17. VBAT selection jumper
        • short the jumper to use system power supply
        • open the jumper to connect the VBAT to external power, such as battery
      18. VREF selection jumper
        • short the jumper to connect VREF+ to VCC
        • open the jumper to connect VREF+ to other custom pin via jumper wire

      Package Contains

      1. Open429I-C development board x 1
      2. USB type A plug to mini-B plug cable x 1
      3. USB type A receptacle to mini-B plug cable x 1
      4. 4-pin 2-pin wires pack x 1
      5. USB power cable x 1
      6. Software CD x 1

      Note: 
      The Open429I-C supports programming via UART bootloader 
      The Open429I-C does NOT integrate any debugging function, a debugger is required.


      JTAG/SWD interfaces

      The figure 1, and 2 show the header pinouts of JTAG/SWD interface


      JTAG Header Pinout

      SWD Header Pinout

      Development Resources

      • Schematic
      • Demo code (examples in C, μC/OS-II)
      • STM32 development software (KEIL etc.)
      • STM32 datasheets
      • STM32 development documentations

      Wiki: www.waveshare.com/wiki/Open429I-C

      Waveshare Electronics
      WS-9186

      Specific References

      Open429I-C Standard, STM32F4 Development Board (WS-9186) for STM32F429

      Open429I-C Standard, STM32F4 Development Board (WS-9186) for STM32F429

      €118.80

      99.00 € tax excl.