RLX COMPONENTS s.r.o. , Electronic Components Distributor.
RLX COMPONENTS s.r.o. , Electronic Components Distributor.
5.83inch E-Paper Display (G), E-ink Display, 648 × 480, Red/Yellow/Black/White, SPI Interface (WS-32584) display only
WS-32584
€34.32
27.90 € tax excl.
5.83inch E-Paper Display (G), E-ink Display, 648 × 480, Red/Yellow/Black/White, SPI Interface (WS-32584) display only
5.83inch E-Paper Display (G), E-ink Display, 648 × 480, Red/Yellow/Black/White, SPI Interface (WS-32584) display only
5.83inch e-Paper display (G), e-ink display, 648 × 480, Red/Yellow/Black/White, SPI Interface
5.83″ e-Paper (G)
low power consumption, wide viewing angle, paper-like displaying without electricity
Ideal for price tags, shelf labels, industrial instruments...
- Size
5.83″ - Resolution
648 × 480 - Viewing Angle
>170° - Display Color
Red/Yellow/Black/White - Grey Scale
2
- Size
- Communication
SPI - Display Panel
E-paper - Experience
Paper-like - Environment
Ambient Light Required - Display Type
Passively Reflective
Version Options
5.83inch e-Paper (G)
raw display, without driver board
5.83inch e-Paper HAT (G)
with e-Paper Driver HAT
Features at a glance
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Comes with online development resources and manual (e-Paper Driver HAT circuit diagram, examples for Raspberry Pi / Jetson Nano / ESP32 / Arduino / STM32)
- Optional for e-Paper Driver HAT:
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards and Jetson Nano
- Adapting SPI interface for connecting with controller boards like Raspberry Pi / Jetson Nano / ESP32 / Arduino / STM32, etc.
- Onboard voltage translator, compatible with 3.3V / 5V MCUs
Specifications
| operating voltage | Raw display: 3.3V | display color | Red/Yellow/Black/White |
|---|---|---|---|
| with driver board: 3.3V/5V | |||
| interface | 3-wire SPI, 4-wire SPI | grey scale | 2 |
| outline dimensions | Raw display: 125.40 × 99.50 × 1.20 (mm) | Fast Refresh Time | 12s |
| driver board: 30.5 × 65 (mm) | full refresh time | 20s | |
| display size | 118.78 × 88.22 (mm) | refresh power | <100mW |
| DOT PITCH | 0.1833 × 0.1833 (mm) | standby current | <0.01uA (almost none) |
| RESOLUTION | 648 × 480 pixels | viewing angle | >170° |
Advantages of EINK
E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.
Standard Raspberry Pi 40PIN GPIO header
compatible with Raspberry Pi series boards and Jetson Nano
Raspberry Pi in the photo is NOT included.
Optional for e-Paper Driver HAT
Onboard SPI Control Interface, For Use With Controller Boards Like Raspberry Pi / Jetson Nano / ESP32 / Arduino / STM32
| VCC | 3.3V/5V |
|---|---|
| GND | Ground |
| DIN | SPI MOSI pin |
| SCLK | SPI SCLK pin |
| CS | SPI chip selection, low active |
| DC | Data / Command selection (high for data, low for command) |
| RST | External reset, low active |
| BUSY | Busy status output |
| PWR | Power control pin |
Onboard Voltage Translator
Compatible With 3.3V / 5V MCUs
Application examples
Suitable for price Tags, asset/equipment Tags, shelf labels, conference name tags...
Outline dimensions
Balenie Obsahuje / Package Content
5.83inch e-Paper (G) x1
WS-32584
Specific References
5.83inch E-Paper Display (G), E-ink Display, 648 × 480, Red/Yellow/Black/White, SPI Interface (WS-32584) display only
5.83inch E-Paper Display (G), E-ink Display, 648 × 480, Red/Yellow/Black/White, SPI Interface (WS-32584) display only
€34.32
27.90 € tax excl.