By continuing use this site, you agree to the Terms & Conditions and our use of cookies.
  • New

    3.52inch e-Paper HAT, 360 × 240, SPI Interface (WS-22698)

    WS-22698
    €27.48
    Tax included

    22.90 € tax excl.

    3.52inch e-Paper HAT, 360 × 240, SPI Interface (WS-22698)

    Quantity :
    • Secure purchase
    • Fast delivery
    • Purchase help

    3.52inch e-Paper HAT, 360 × 240, SPI Interface (WS-22698)

    3.52inch E-Paper HAT, 360 × 240, SPI Interface

    3.52″ E-Paper HAT

    Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity

    Ideal for price tags, shelf labels, industrial instruments...

     3.52inch-e-Paper-HAT-details-1.jpg
      • SizeDimension.png3.52″
      • ResolutionResolution.png360×240
      • Viewing AngleViewing_angle.png>170°
      • Display ColorDisplay-BW.pngBlack/White
      • Grey ScaleGray-scale-2.png2
    • CommunicationSPI.pngSPI
    • Display Panele-Paper.pngE-paper
    • ExperiencePaper.pngPaper-like
    • EnvironmentBulb.pngAmbient Light Required
    • Display TypeReflective.pngPassively Reflective
    Features At A Glance
    • No backlight, keeps displaying last content for a long time even when power down
    • Ultra low power consumption, basically power is only required for refreshing
    • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
    • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/STM32, etc.
    • Onboard voltage translator, compatible with 3.3V/5V MCUs
    • Comes with development resources and manual(driver board schematic, examples for Raspberry Pi/Arduino/STM32)
    Specifications
    OPERATING VOLTAGE 3.3V/5V DISPLAY COLOR Black/White
    INTERFACE 3-wire SPI, 4-wire SPI GREY SCALE 2
    OUTLINE DIMENSIONS 86.5 × 57mm FULL REFRESH TIME 1.5s
    DISPLAY SIZE 74.51 × 49.67mm REFRESH POWER <25mW (typ.)
    DOT PITCH 0.207 × 0.207mm STANDBY CURRENT <0.01uA (almost none)
    RESOLUTION 360×240 pixels VIEWING ANGLE >170°
    Advantages Of EINK

    E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
    E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

    Standard Raspberry Pi 40PIN GPIO Header

    Similar To The Size Of Raspberry Pi, Compatible With The Size Of Raspberry Pi 4B / 3B / 3B+

    3.52inch-e-Paper-HAT-details-3.jpg
    Onboard SPI Control Interface

    For Use With Controller Boards Like Raspberry Pi/STM32/Arduino

    3.52inch-e-Paper-HAT-details-5.jpg
    VCC Power (3.3V / 5V input)
    GND Ground
    DIN SPI MOSI pin
    CLK SPI SCK pin
    CS SPI chip selection, low active
    DC Data/Command selection (high for data, low for command)
    RST External reset, low active
    BUSY Busy status output pin
    Onboard Voltage Translator

    Compatible With 3.3V / 5V MCUs

    3.52inch-e-Paper-HAT-details-7.jpg
    Application Examples

    Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

    Outline Dimensions
    3.52inch-e-Paper-HAT-details-size.jpg
    Resources & Services
    res_banner.png

    Balenie Obsahuje / Package Content

    1. 3.52inch e-Paper HAT x1
    2. PH2.0 20cm 8Pin x1
    Waveshare Electronics
    WS-22698

    Specific References

    16 other products in the same category: