- New
RLX COMPONENTS s.r.o. , Electronic Components Distributor.
RLX COMPONENTS s.r.o. , Electronic Components Distributor.
RM500U-CNV 5G HAT for Raspberry Pi, with case, quad antennas LTE-A, multi band, 5G/4G/3G (WS-22706)
WS-22706
€198.90
165.75 € tax excl.
RM500U-CNV 5G HAT for Raspberry Pi, with case, quad antennas LTE-A, multi band, 5G/4G/3G (WS-22706)
RM500U-CNV 5G HAT for Raspberry Pi, with case, quad antennas LTE-A, multi band, 5G/4G/3G (WS-22706)
RM500U-CNV 5G HAT For Raspberry Pi, Quad Antennas LTE-A, Multi Band, 5G/4G/3G Compatible
Raspberry Pi RM500x / RM502x 5G HAT
Supports 5G/4G/3G
* for reference only, Raspberry Pi board is NOT included
Features At A Glance
- Integrates extensive network protocols, with multi drivers and software support, compatible with different OS including Windows / Linux / Android
- USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G communication
- Standard M.2 B KEY slot, compatible with different 5G modules: RM500U-CNV / RM500Q-GL / RM500Q-AE / RM502Q-AE series
- Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino
- Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply
- Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status
- 2x SIM card slot, dual card single standby, switchable via AT command
- High efficiency power supply circuit, up to 3A output current
Standard M.2 B KEY Slot
Compatible With RM500U-CNV, RM500Q-GL, RM500Q-AE, RM502Q-AE, RM520N-GL Series Modules
| 5G SUB-6 | RM500U-CNV | RM500Q-GL | RM500Q-AE | RM502Q-AE | RM520N-GL | |
|---|---|---|---|---|---|---|
 |
 |
 |
 |
 |
||
| 5G Standard | 3GPP R15 | 3GPP R16 | ||||
| Region / Provider | China, EMEA, Asia-Pacific | Global (except US) | Global (except China) | Global | ||
| Operating temperature | -30 °C ~ +75 °C | -30 °C ~ +70 °C | ||||
| Extension temperature | -40 °C ~ +85 °C | |||||
| Dimensions | 30.0 × 52.0 (mm) | |||||
| FREQUENCY BAND | ||||||
| 5G | 5G NR NSA | n41, n78, n79 | n41, n77, n78, n79 | n1, n2, n3, n5, n7, n8, n12, n20, n25, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79 | n1, n2, n3, n5, n7, n8, n12, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n71, n75, n76, n77, n78, n79 | |
| 5G NR SA | n1, n3, n5, n8, n28, n41, n77, n78, n79 | n1, n2, n3, n5, n7, n8, n12, n20, n25, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79 | n1, n2, n3, n5, n7, n8, n12, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n71, n75, n76, n77, n78, n79 | |||
| LTE | LTE-FDD | B1, B2, B3, B5, B7, B8, B20, B28 | B1, B2, B3, B4, B5, B7, B8, B12(B17), B13, B14, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 | |||
| LTE-TDD | B34, B38, B39, B40, B41 | B34, B38, B39, B40, B41, B42, B43, B48 | ||||
| LAA | - | B46 | ||||
| UMTS | WCDMA | B1, B2, B5, B8 | B1, B2, B3, B4, B5, B6, B8, B19 | B1, B2, B4, B5, B8, B19 | ||
| GNSS | - | GPS / GLONASS / BeiDou (Compass) / Galileo | ||||
| DATA RATE | ||||||
| 5G SA Sub-6 | downlink 2 Gbps; uplink 1 Gbps |
downlink 2.1 Gbps; uplink 900 Mbps |
downlink 2.1 Gbps; uplink 450 Mbps |
downlink 4.2 Gbps; uplink 450 Mbps |
downlink 2.4 Gbps; uplink 900 Mbps |
|
| 5G NSA Sub-6 | downlink 2.2 Gbps; uplink 575 Mbps |
downlink 2.5 Gbps; uplink 600/650 Mbps |
downlink 2.5 Gbps; uplink 650 Mbps |
downlink 5 Gbps; uplink 650 Mbps |
downlink 3.4 Gbps; uplink 550 Mbps |
|
| LTE | downlink 600 Mbps; uplink 150 Mbps |
downlink 1.0 Gbps; uplink 200 Mbps |
downlink 1.0 Gbps; uplink 200 Mbps |
downlink 2 Gbps; uplink 200 Mbps |
downlink 1.6 Gbps; uplink 200 Mbps |
|
| UMTS | downlink 42.2 Mbps; uplink 11 Mbps |
downlink 42 Mbps; uplink 5.76 Mbps |
||||
Supports 5G/4G/3G Networking
Support 5G NSA (4G And 5G Co-Networking) And SA (5G Separate Networking)
Support 4G/3G Internet
* the frequency band diagram above is for reference only, please confirm the supported bands according to your local service provider.
Multi System Support, Easy To Use
Supports Windows / Linux / Android...
Just plug it into USB port, go through some simple configuration, the high speed 5G network connection will be ready to use
Connection Examples
For Windows PC Or Jetson Nano Series, Use A USB Cable
For Raspberry Pi 5/4B/3B+, Or CM4-IO-BASE-A/B, Use The Purpose-Made USB Adapter
connecting with Raspberry Pi 5
connecting with Raspberry Pi 4B
connecting with Raspberry Pi 3B+
connecting with CM4 IO Base
Cloud Communication
Multi-Constellation High-Precision GNSS
Supports GPS, Beidou, Glonass, Galileo
Note: GNSS is not available for RM500U-CNV module.
Standard Raspberry Pi 40PIN GPIO Header
Compatible With Raspberry Pi Series And Jetson Nano, Stackable Design For More HATs
* for reference only, please check the Package Content section for exact part list.
High Speed Cooling Fan
Better Heat Dissipation For Both Raspberry Pi And The 5G Module
What's On Board
- Raspberry Pi GPIO header
for connecting with Raspberry Pi - DIP switches
Enables the power control and reset pins - M.2 slot
Compatible with most SIMCom and QUECTEL 4G/5G modules in M.2 form factor - SIM card slot 1
one of the 2x SIM card slots, dual card single standby - USB3.1 port
USB 2.0 compatible, for connecting with different hosts - USB Type-C port
5V 3A input, stable and flexible power supply
- Audio jack
SIM7600X/SIM8XXX series supports audio function, but RM5XX/EM06XX series temporarily does not support this function - Antenna connector
Supports quad antennas - Reset button
- Power supply switch
Switch the power supply mode:
When set to USB, the module is powered via the "5. USB3.1 port"
When set to EXT PWR, the module is powered by the external power supply via the "6. USB Type-C port" - Indicator
Easy to monitor the operating status of module
- Cooling fan
Better heat dissipation for both Raspberry Pi and the 5G module - SIM card slot 2
Switchable via AT command - Module settings switch
Switch A to ON for SIM7600X/A7906X/SIM7906X/SIM7912X series 4G M.2 modules;
Switch B to ON for SIM8202X/SIM8200EA/SIM8262X series 5G M.2 modules;
Switch C to ON for RM50X/RM520N-GL/EM06X series 5G/LTE-A M.2 modules
- USB 2.0 interface pads
- NAU8810X Audio Chip
For SIM7600X/SIM8XXX series modules, RM5XX and EM06XX series modules temporarily does not support this function - Fan Header
5V cooling fan power supply
Optional Case
Multiple Installation Methods, Convenient For Various Application Such As Industry
* The case is optional and only suitable for Raspberry Pi 4B, please choose a proper option before placing order
Application Examples
5G Wireless Router
Combined with OpenWrt, turns the Raspberry Pi into a 5G wireless router, providing WiFi hotspot for smartphones to easily access the 5G Network.
5G Live Streaming
While mounting an additional camera, it is able to do live streaming on webpage or live platform through ffmpeg video stream.
More Possibilities
Outline Dimensions
Resources & Services
Balenie Obsahuje / Package Content
RM500x / RM502x 5G HAT
- Protection case kit x1
- M.2 TO 4G/5G HAT x1
- 5G Module x1
- Antenna 4pcs x1
- IPEX adapter cable 4pcs x1
- OPTIONS GNSS antenna x1
* This antenna is NOT included in the RM500U-CNV kit which has no GNSS function - 2*20PIN pin header x1
- 5V 3A Type-C power adapter x1
- Dual plug USB3.0 cable x1
- USB3.0 adapter x1
- USB2.0 adapter x1
- SMA protective cap 4pcs x1
- Screws pack x1
WS-22706
Specific References
RM500U-CNV 5G HAT for Raspberry Pi, with case, quad antennas LTE-A, multi band, 5G/4G/3G (WS-22706)
RM500U-CNV 5G HAT for Raspberry Pi, with case, quad antennas LTE-A, multi band, 5G/4G/3G (WS-22706)
€198.90
165.75 € tax excl.