• New
    BG95 EVB Development Board Designed For QuecPython, LTE / EGPRS  GNSS Positioning (WS-27094)
    BG95 EVB Development Board Designed For QuecPython, LTE / EGPRS  GNSS Positioning (WS-27094)
    BG95 EVB Development Board Designed For QuecPython, LTE / EGPRS  GNSS Positioning (WS-27094)
    BG95 EVB Development Board Designed For QuecPython, LTE / EGPRS  GNSS Positioning (WS-27094)
    BG95 EVB Development Board Designed For QuecPython, LTE / EGPRS  GNSS Positioning (WS-27094)
    BG95 EVB Development Board Designed For QuecPython, LTE / EGPRS  GNSS Positioning (WS-27094)

    BG95 EVB Development Board Designed For QuecPython, LTE / EGPRS GNSS Positioning (WS-27094)

    WS-27094
    €64.92

    54.10 € tax excl.

    BG95 EVB Development Board Designed For QuecPython, LTE / EGPRS  GNSS Positioning (WS-27094)

    Quantity :
    OUT OF STOCK

    BG95 EVB Development Board Designed For QuecPython, LTE / EGPRS  GNSS Positioning (WS-27094)

    BG95 EVB Development Board Designed For QuecPython, Low Power Consumption, Supports LTE / EGPRS Communication And GNSS Positioning

    BG95 EVB Development Board

    Compact & Portable Development Board Designed for QuecPython

    Supports LTE Cat M1 / LTE Cat NB2 / EGPRS Communication, GNSS Positioning

    BG95 EVB development board, front view
    Features At A Glance

    The BG95-M3 Zero development board is equipped with BG95-M3 module, which is a multi-mode LPWA module supporting LTE Cat M1 / LTE Cat NB2 / EGPRS. It is 3GPP Rel-14 compliant and offers maximum data rate of 588 kbps downlink and 1119 kbps uplink under LTE Cat M1. Features ultra-low power consumption with built-in MCP as well as the ARMCortex A7 processor supporting ThreadX.

    • Equipped with BG95-M3 main module, supports LTE Cat M1 / LTE Cat NB2 / EGPRS networking, applicable across global regions
    • Onboard 40PIN GPIO header, compatible with most Raspberry Pi HATs
    • 5 LEDs for indicating module operating status
    • Onboard Type-C port for easy development with just a USB Type-C cable
    • Supports PPP, TCP, UDP, SSL, TLS, FTP(S), HTTP(S), NITZ, PING, MQTT, LwM2M, CoAP, IPv6 protocols, etc.
    • Supports GNSS positioning (GPS, GLONASS, BDS, Galileo, QZSS)
    • Onboard Nano SIM card slot, supports 1.8V SIM card, and is designed near the edge of the board for easy insertion and removal of SIM card
    • Provides tools such as QPYcom, Thonny IDE plugin, and VSCode plugin, etc. for easy learning and development
    • Comes with online development resources and manual (example in QuecPython)

    Specifications
    MODEL BG95-M3 EC200U-EU EC200U-AU
    Product Picture BG95-M3 EC200U-EU EC200U-AU
    Applicable Region Global Europe, Middle East, Africa, Australia, New Zealand, Brazil Australia/Latin America
    FREQUENCY BAND
    LTE-FDD Cat M1:
    B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B26, B27, B28, B66, B85
    Cat NB2:
    B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B28, B66, B71, B85
    B1, B3, B5, B7, B8, B20, B28 B1, B2, B3, B4, B5, B7, B8, B28, B66
    LTE-TDD N/A B38, B40, B41
    GSM / GPRS / EDGE 850, 900, 1800, 1900 MHz GSM: B2, B3, B5, B8
    GNSS GPS, GLONASS, BDS, Galileo, QZSS
    Bluetooth N/A Bluetooth 4.2 (BR/EDR)
    Wi-Fi Scan N/A 2.4 GHz 11b (Rx)
    DATA TRANSMISSION
    CAT 1 N/A LTE-FDD: DL 10 Mbps; UL 5 Mbps
    LTE-TDD: DL 8.96 Mbps; UL 3.1 Mbps
    NB-IoT Cat NB2:
    DL 127 Kbps; UL 158.5 Kbps
    Cat NB1:
    DL 32 Kbps; UL 70 Kbps
    N/A
    Cat-M DL 588 Kbps; UL 1119 Kbps N/A
    GSM / GPRS / EDGE EDGE: DL 296 Kbps; UL 236.8 Kbps
    GPRS: DL 107 Kbps; UL 85.6 Kbps
    GSM: DL 85.6 Kbps; UL 85.6 Kbps
    OTHERS
    Type-C USB Port Supports AT commands testing, GNSS positioning, firmware upgrading, etc.
    Communication Protocol PPP, TCP, UDP, SSL, TLS, FTP(S), HTTP(S), NITZ, PING, MQTT, LwM2M, CoAP, IPv6 TCP, UDP, PPP, NITZ, PING, FILE, MQTT, NTP, HTTP, HTTPS, SSL, FTP, FTPS, CMUX, MMS
    SIM Card Nano SIM card (supports 1.8V only) Nano SIM and eSIM, dual card single standby
    Indicator SIM_CHK: lights up when a SIM card is inserted into the card slot
    NET: Network indicator
    PSM: Sleep indicator
    PWM: PWM function indicator
    PWR: Power indicator
    P01: Module Pin 1, default as EC200A-XX PWM0
    P05: Module Pin 5, NET_MODE indicator
    SCK1: SIM1 detection indicator, lights up when SIM1 card is inserted
    SCK2: SIM2 detection indicator, lights up when SIM2 card is inserted
    PWR: Power indicator
    Buttons PWK: Power ON/OFF
    PON: PSM wake-up
    BOOT: Forcing into firmware burning mode
    USB ON/OFF: USB power consumption detection switch
    PWK: Power ON/OFF
    RST: Reset
    BOOT: Forcing into firmware burning mode
    USB ON/OFF: USB power consumption detection switch
    Antenna Connectors LTE main antenna + DIV antenna + GNSS antenna LTE main antenna + DIV / WIFI (scanning only) / Bluetooth antenna + GNSS antenna
    Operating Temperature -30 ~ 75°C
    Storage Temperature -45 ~ 90°C

    Type-C Interface

    Easy To Develop With Just A USB Type-C Cable

    BG95 EVB development board with Type-C interface

    Onboard 40PIN GPIO Header

    Compatible With Most Raspberry Pi HATs

    BG95 EVB development board with 40PIN GPIO pin header

    Supports Various Development Tools

    Provides Tools Such As QPYcom, Thonny IDE Plugin, And VSCode Plugin, Etc. For Easy Learning And Development

    BG95 EVB development board supports various development tools

    What’s Onboard
    BG95 EVB development board onboard components

    Onboard Components

    1. BG95-M3 module
    2. TPS63020DSJR power IC
    3. TLV75533PDRVR power IC
    4. NCP114AMX180TBG power IC
    5. TXS0104EYZTR voltage level translator
    6. Nano-SIM card slot
    7. NET Network indicator
    8. PSM Sleep indicator
    9. PWM function indicator
    10. PWR Power indicator
    11. SIM_CHK indicator
      lights up when SIM card is inserted
    12. Power ON/OFF button
    13. PSM wake-up button
    14. BOOT button
      Press before powering on to force firmware burning mode
    15. USB detection ON/OFF
      Normally closed: USB can be connected normally;
      Normally open: Type-C supplies power only to the evaluation board, used for module power consumption measurement
     

    Interfaces

    1. Raspberry Pi GPIO Header
      Compatible with Raspberry Pi HATs, for more details, please refer to Pinout Definition
    2. Power ON/OFF jumper
      Connect: auto turn on, short press PWK button to restart
      Disconnect: short press PWK button to power on, long press to power off
    3. 1.8V output jumper
      Connect: outputs 1.8V externally
      Disconnect: used to test power consumption
    4. Module power supply jumper
      Connect: DCDC to power the module
    5. GNSS active power supply selection
      Connect: enable GNSS active power supply
    6. USB Type-C port
    7. Main antenna connector
    8. AUX antenna connector
    9. GNSS antenna connector
    10. Battery power supply header
      Supports 2.5V-5.5V battery (Note: the board cannot be powered by USB port and battery at the same time)

    Pinout Definition
    BG95 EVB development board pinout definition
    Outline Dimensions
    BG95 EVB development board outline dimensions

    Balenie Obsahuje / Package Content

    BG95-M3 Zero x1

    BG95-M3 Zero

    Waveshare Electronics
    WS-27094

    Specific References

    BG95 EVB Development Board Designed For QuecPython, LTE / EGPRS GNSS Positioning (WS-27094)

    €64.92

    54.10 € tax excl.