5.83inch E-Paper E-Ink Display HAT For Raspberry Pi, 648×480, Black / White, SPI (WS-14597)
      5.83inch E-Paper E-Ink Display HAT For Raspberry Pi, 648×480, Black / White, SPI (WS-14597)

      5.83inch E-Paper E-Ink Display HAT For Raspberry Pi, 648×480, Black / White, SPI (WS-14597)

      WS-14597
      €65.94

      54.95 € tax excl.

      5.83inch E-Paper E-Ink Display HAT For Raspberry Pi, 648×480, Black / White, SPI (WS-14597)

      Quantity :
      OUT OF STOCK

      5.83inch E-Paper E-Ink Display HAT For Raspberry Pi, 648×480, Black / White, SPI (WS-14597)

      5.83inch E-Paper E-Ink Display HAT For Raspberry Pi, 648×480 Pixels, Black / White Dual-Color, SPI Interface

      5.83" E-PAPER HAT

      Low Power Consumption, Wide Viewing Angle, Paper-Like Displaying Without Electricity

      Ideal for price tags, shelf labels, industrial instruments...

      5.83inch-e-Paper-HAT-details-1.jpg
        • SizeDimension.png5.83"
        • ResolutionResolution.png648×480
        • Viewing AngleViewing_angle.png>170°
        • Display ColorDisplay-BW.pngBlack / White
        • Grey ScaleGray-scale-2.png2
      • CommunicationSPI.pngSPI
      • Display Panele-Paper.pngE-paper
      • ExperiencePaper.pngPaper-like
      • EnvironmentBulb.pngAmbient Light Required
      • Display TypeReflective.pngPassively Reflective
      Features At A Glance
      • No backlight, keeps displaying last content for a long time even when power down
      • Ultra low power consumption, basically power is only required for refreshing
      • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
      • SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
      • Onboard voltage translator, compatible with 3.3V / 5V MCUs
      • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
      Specifications
      OPERATING VOLTAGE 3.3V/5V DISPLAY COLOR black, white
      INTERFACE 3-wire SPI, 4-wire SPI GREY SCALE 2
      OUTLINE DIMENSIONS 125.40 × 99.50mm FULL REFRESH TIME 5s
      DISPLAY SIZE 119.232 × 88.320mm REFRESH POWER 26.4mW(typ.)
      DOT PITCH 0.184 × 0.184mm STANDBY CURRENT <0.01uA (almost none)
      RESOLUTION 648 × 480 pixels VIEWING ANGLE >170°
      Advantages Of EINK

      E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper. 
      E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

      Standard Raspberry Pi 40PIN GPIO Header

      Compatible With Raspberry Pi Series Boards, Jetson Nano

      5.83inch-e-Paper-HAT-details-3.jpg
      Raspberry Pi, Jetson Nano in the photo are NOT included.
      Onboard SPI Control Interface

      For Use With Other Controller Boards Like STM32/Arduino

      e-Paper-Driver-HAT-details-SPI.jpg
      VCC 3.3V/5V
      GND Ground
      DIN SPI MOSI pin
      CLK SPI SCK pin
      CS SPI chip selection, low active
      DC Data / Command selection (high for data, low for command)
      RST External reset, low active
      BUSY Busy status output, high active

      * for Arduino UNO, due to its RAM limit, it is better to choose the e-Paper Shield

      Application Examples

      Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

      Outline Dimensions
      5.83inch-e-Paper-details-size.jpge-Paper-Driver-HAT-details-size.jpg
      Resources & Services
      res_banner.png

      Package Content :

      1. 5.83inch e-Paper x1
      2. e-Paper Driver HAT x1
      3. RPi screws pack (2pcs) x1
      4. PH2.0 20cm 8Pin x1
      15.83inch-e-Paper-5_220.jpg
      2e-Paper-Driver-HAT-1_93.jpg
      3RPi-screws-pack-8-x2-hexa.jpg
      4PH2.0-wire-20cm-8PIN_93.jpg
      Waveshare Electronics
      WS-14597

      Specific References

      5.83inch E-Paper E-Ink Display HAT For Raspberry Pi, 648×480, Black / White, SPI (WS-14597)

      €65.94

      54.95 € tax excl.