64GB eMMC Module C0/C1/C1+ Linux Black  (Hardkernel G145627455789)  for ODROID-C0/C1/C1+

for ODROID-C0 / C1 / C1+

Pre-installed Ubuntu 14.04 or latest version. 
Ready to run out of box

eMMC Version 5.0 interface or higher version from Samsung. 
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. 
Note! ODROID-C1 / C1+ / C0 host supports eMMC version 4.5
The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)

This eMMC chipset is not compatible with ODROID-XU4 / XU3 / U3 / U2 / X series

Schematics : http://dn.odroid.com/eMMCModule/

You need the above eMMC Module Reader to update the OS of the eMMC Module. Transcend USB multi-slot SD Card reader in the below picture is not included.

More about the eMMC Module : http://odroid.com/dokuwiki/doku.php?id=en:emmc_reference_chart

Storage I/O comparison  To obtain the results in the storage I/O comparison graph, type the following lines at a command prompt. The first command tests the write speed, and the second command tests the read speed:  $ dd if=/dev/zero of=test.tmp oflag=direct bs=500K count=1024  $ dd if=test.tmp of=/dev/null iflag=direct bs=500K count=1024

Schematics : http://dn.odroid.com/eMMCModule/ eMMC Module Reader is included

You need the above eMMC Module Reader to update the OS of the eMMC Module. Transcend USB multi-slot SD Card reader in the below picture is not included.

More about the eMMC Module : http://odroid.com/dokuwiki/doku.php?id=en:emmc_reference_chart