• New
    ODROID-H3+ (Hardkernel) Intel  Quad-Core Processor Jasper Lake N6005 G220915140803
    ODROID-H3+ (Hardkernel) Intel  Quad-Core Processor Jasper Lake N6005 G220915140803
    ODROID-H3+ (Hardkernel) Intel  Quad-Core Processor Jasper Lake N6005 G220915140803
    ODROID-H3+ (Hardkernel) Intel  Quad-Core Processor Jasper Lake N6005 G220915140803
    ODROID-H3+ (Hardkernel) Intel  Quad-Core Processor Jasper Lake N6005 G220915140803

    ODROID-H3+ (Hardkernel) Intel Quad-Core Processor Jasper Lake N6005 G220915140803

    HK-ODROID-H3+
    €239.40

    199.50 € tax excl.

    ODROID-H3+ (Hardkernel) Intel  Quad-Core Processor Jasper Lake N6005 G220915140803

    Quantity :
    OUT OF STOCK

    ODROID-H3+ (Hardkernel) Intel  Quad-Core Processor Jasper Lake N6005 G220915140803

    ODROID-H3+ has same form factor and similar power efficiency as their predecessor, the ODROID-H2+. But, H3+ is more powerful, offers higher performance.

    • Intel® Quad-Core Processor Jasper Lake N6005 has a base clock of 2GHz and a boost clock of 3.3GHz with 1.5MB L2 and 4MB L3 cache by a 10 nm process.
    • Up to 64GB Dual-channel Memory DDR4 PC4-23400 (2933MT/s)
    • Two SO-DIMM slots, up to 32GB per slot
    • PCIe 3.0 x 4 lanes for one M.2 NVMe storage
    • 2 x 2.5Gbit Ethernet ports
    • 2 x SATA 3.0 ports
    • SSE4.2 accelerator (SMM, FPU, NX, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AES)
    • Intel UHD Graphics 32 EUs Turbo 900MHz
    • HDMI 2.0 and DP 1.2 multiple video outputs
    • A configurable Unlimited Performance mode allowing the CPU to run in sustained turbo boost mode.
    • RTC / BIOS backup battery is included

     

    • A. CPU (Intel Celeron N6005)
    • B. 2 x DDR4 SO-DIMM slots (Dual channel memory support)
    • C. 1 x M.2 PCI Express Module Socket (NGFF-2280)
    • D. 1 x eMMC (Embedded Multimedia-Card) Socket
    • E. 2 x SATA Power Connectors (2.5mm pitch, JST-XH compatible connector)
    • F. 2 x SATA3 6.0 Gb/s Data Connectors
    • G. 1 x DC Power Jack
    • H. 2 x USB 3.0
    • I. 2 x USB 2.0
    • J. 1 x HDMI 2.0
    • K. 1 x DisplayPort 1.2
    • L. 2 x RJ45 Ethernet Ports (10/100/1000/2500)
    • M. 5 x System LED Indicators
    • N. 1 x Peripheral Expansion Header (24-pin)
    • O. 1 x Power Switch
    • P. 1 x Reset Switch
    • Q. 1 x Backup Battery Connector (2-pin)
    • R. 1 x Active Cooling Fan Connector (4-pin)
    • S. 1 x Audio out, 1 x Audio in, 1 x SPDIF out

    -On the H3+ board, a yellow round sticker is attached on the product serial label and, on the H3 board, a green round sticker is attached.

     

     

    Processor Intel Celeron N6005 Processor (10nm, Quad-Core, TDP 10W)

    H3+(N6005) : up to 3.3Ghz

    4MB L2 Cache

    Intel UHD Graphics (24/32 EU up to 900MHz)

    Memory 2 x DDR4 1.2V SO-DIMM slots

    Dual Channel, up to 2933 MT/s (DDR4-PC23400)

    Max memory capacity 64GB

    DDR3/DDR5 are not supported

    Storage 1 x eMMC connector (bootable and selectable on BIOS)

    Various eMMC modules can be purchased at Hardkernel store

    2 x SATA3 6Gbps

    1 x M.2 slot (PCIe 3.0 x 4, supports NGFF-2280 cards)

    M.2 SATA SSD is not supported

    Networking 2 x GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps)

    Realtek RTL8125B

    Supports Wake-On-Lan

    LED indicators (Green: Link, Amber: Traffic)

    Video 1 x DisplayPort 1.2 (up to 4K@60Hz)

    1 x HDMI 2.0 (up to 4K@60Hz)

    Dual simultaneous display support

    Audio 1 x Audio out (3.5mm jack)

    1 x Audio in (3.5mm jack)

    1 x SPDIF out (ALC1200, HDA codec)

    * HDMI & DP have audio output too.

    External I/O 2 x USB 3.0 Host ports

    2 x USB 2.0 Host ports

    1 x Peripheral Expansion Header (24-pin, 2.54mm pitch)

    – 1 x DC 5V, 1 x DC 3.3V, 5 x GND

    – 1 x UART (TXD/RXD/RTS/CTS)

    – 2 x I2C (SCL/SDA)

    – 1 x External Power Button

    – HDMI CEC, 5VA+

    – 3 x USB 2.0

    – All 3.3V I/O signal level

    Other features Passive Heatsink

    BIOS Backup Battery

    – Maintains system time and BIOS settings

    Power Button

    Reset Button

    System LEDS Indicators:

    – Red (PWR) – Solid light when DC power is supplied

    – Blue (left, SLEEP) – turns off only when the system enters into suspend mode

    – Blue (right, PMIC) – turns on only when the major power rails are working

    – Amber (SATA) – Flashes when SATA data transfers

    – Green (NVMe) – Flashes when NVMe data transfers

    Active Cooling Fan Connector (12V 4-pin, PWM input + TACHO output)

    – Active Cooling Fan is optional

    – Connector (4-pin, 2.54mm pitch)

    Power DC jack : outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm

    DC 14V ~ 20V (up to 60W)

    – DC 15V/4A power adapter is recommended if you don’t use two 3.5“ HDDs

    – DC 19V/7A power adapter is recommended if you two 3.5” HDDs together

    Power consumption:

    – IDLE : ≃1..9W

    – CPU Stress : ≃15W

    – CPU+GPU Stress : ≃18W

    – Power-off : ≃0.25W

    – Suspend : ≃0.6W

    Form Factor 110mm x 110mm x 47mm Approx.

    https://wiki.odroid.com/odroid-h3/start#installation

     

    WIKI

    https://wiki.odroid.com/odroid-h3/start

     

    Introduction

    https://dn.odroid.com/ODROID-H2/H3_pics/H3_H3+_Introduction.pdf

    Hardkernel
    HK-ODROID-H3+

    Specific References

    You might also like

    ODROID-H3+ (Hardkernel) Intel Quad-Core Processor Jasper Lake N6005 G220915140803

    €239.40

    199.50 € tax excl.