By continuing use this site, you agree to the Terms & Conditions and our use of cookies.
      OLED display 128x128 1.5inch RGB Module, 16-bit high color (WS-14747)
      • OLED display 128x128 1.5inch RGB Module, 16-bit high color (WS-14747)
      • OLED display 128x128 1.5inch RGB Module, 16-bit high color (WS-14747)
      • OLED display 128x128 1.5inch RGB Module, 16-bit high color (WS-14747)

      OLED display 128x128 1.5inch RGB Module, 16-bit high color (WS-14747)

      WS-14747
      €17.88
      Tax included

      14.90 € tax excl.

      OLED display 128x128 1.5inch RGB Module, 16-bit high color (WS-14747)

      Quantity :
      • Secure purchase
      • Fast delivery
      • Purchase help

      OLED display 128x128 1.5inch RGB Module, 16-bit high color (WS-14747)

      1.5inch RGB OLED display module, 128x128 pixels, 16-bit high color, SPI interface

      Overview

      This is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface.

      Features

      • 128x128 high resolution, 65K colors, clearly displays colorful images
      • Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor
      • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

      Specifications

      • Driver: SSD1351
      • Interface: 4-wire SPI, 3-wire SPI
      • Display color: RGB, 65K colors
      • Resolution: 128x128
      • Viewing angle: >160°
      • Operating voltage: 3.3V / 5V
      • Dimension: 44.5 x 37 (mm)

      Interface

      SYMBOLDESCRIPTION
      VCC Power (3.3~5V input)
      GND Ground
      DIN Data input
      CLK Clock data input
      CS Chip selection, low active
      DC 4-wire SPI: Data/Command selection (high for data, low for command)
      3-wire SPI: Connects to GND, keeps low
      RST Reset, low active

      There are two available drive interfaces for this RGB OLED module: 4-wire SPI (default) and 3-wire SPI:

       BSDC
      4-wire SPI 0 DC
      3-wire SPI 1 Connects to GND

      Dimensions

      1.5inch RGB OLED Module dimensions

      Development Resources

      Wiki : www.waveshare.com/wiki/1.5inch_RGB_OLED_Module

      Package Content

      1. 1.5inch RGB OLED Module x1
      2. PH2.0 7Pin x1
      1.5inch-RGB-OLED-Module-1_93.jpg
      PH2.0-7PIN_93.jpg

      Selection Guide

      Part NumberColorResolutionDisplay Size (mmxmm)InterfacesDriverDimension (mmxmm)Pinheader
      0.91inch OLED Module White 128x32 22.38×5.58 I2C SSD1306 36.0x12.5 PH2.0 connector
      0.95inch RGB OLED (A) 65K colorful 96x64 20.14x13.42 SPI(4-wire SPI) SSD1331 31.7x37.0 angled/horizontal
      0.95inch RGB OLED (B) 65K colorful 96x64 20.14x13.42 SPI(4-wire SPI) SSD1331 31.7x37.0 straight/vertical
      0.96inch OLED (A) 1/4 yellow section, 3/4 blue section 128x64 21.7x11.2 3-wire SPI, 4-wire SPI, I2C SSD1306 33.0x33.5 angled/horizontal
      0.96inch OLED (B) 1/4 yellow section, 3/4 blue section 128x64 21.7x11.2 3-wire SPI, 4-wire SPI, I2C SSD1306 33.0x33.5 straight/vertical
      1.3inch OLED (A) Blue 128x64 29.42x14.7 3-wire SPI, 4-wire SPI, I2C SH1106 40.5x37.5 angled/horizontal
      1.3inch OLED (B) Blue 128x64 29.42x14.7 3-wire SPI, 4-wire SPI, I2C SH1106 40.5x37.5 straight/vertical
      1.5inch OLED Module White (16 gray scale) 128x128 26.86x26.86 4-wire SPI, I2C SSD1327 44.5x37.0 PH2.0 connector
      1.5inch RGB OLED Module 65K colorful 128x128 26.86x26.86 3-wire SPI, 4-wire SPI SSD1351 44.5x37.0 PH2.0 connector

      Note: the 0.96inch OLED consists of 1/4 yellow upper section and 3/4 blue lower section, not a regular dual-color display.

      Waveshare Electronics
      WS-14747

      Specific References

      Customers who bought this product also bought:

      16 other products in the same category: