RLX COMPONENTS s.r.o. , Electronic Components Distributor.
RLX COMPONENTS s.r.o. , Electronic Components Distributor.
Gigabit/2.5G Dual Ethernet Industrial Computer Raspberry Pi CM5, 4K Display 4G/5G Module, for All CM5 (WS-34121)
WS-34121
€109.47
89.00 € tax excl.
Gigabit/2.5G Dual Ethernet Industrial Computer Raspberry Pi CM5, 4K Display 4G/5G Module, for All CM5 (WS-34121)
Gigabit/2.5G Dual Ethernet Industrial Computer Raspberry Pi CM5, 4K Display 4G/5G Module, for All CM5 (WS-34121)
- IPCBOX-CM5-A (4 × RS485)
- Part No.:IPCBOX-CM5-A (EU)
Gigabit/2.5G Dual Ethernet Industrial Computer based on Raspberry Pi CM5 (NOT included), Supports 4K Display Output and 4G / 5G module, Suitable for all variants of Compute Module 5
Dual Ethernet Industrial Computer
based on Raspberry Pi CM5
based on Raspberry Pi CM5
Designed for Raspberry Pi Compute Module 5
* the Raspberry Pi CM5 is NOT included.
Version Options
IPCBOX-CM5-A
Dual Ethernet ports, onboard 4 × RS485 interfaces
IPCBOX-CM5-B
Dual Ethernet ports, onboard 2 × RS485 + 2 × RS232 interfaces
All versions come with an aluminum alloy case and power supply adapter,
please refer to the package content for the detailed part list.
Specifications
| CM5 socket | Suitable for all variants of Compute Module 5 |
|---|---|
| Networking | 1000M Ethernet RJ45 port × 1 2500M Ethernet RJ45 port × 1 |
| USB | USB 3.2 Gen1 port × 1 |
| USB 2.0 port × 3 | |
| Video | HDMI interface × 1, supports 4K display output |
| M.2 | M.2 M KEY (PCIe Gen2/3 × 1, 2230 / 2242) |
| M.2 B KEY, supports connecting 4G / 5G communication module | |
| Storage | TF card socket for Compute Module 5 Lite (without eMMC) variants |
| Serial Interface | Options for 2 × RS485 + 2 × RS232 version or 4 × RS485 version |
| 1 × CAN with up to 1Mbps communication rate | |
| Digital Input/Output | 2 × digital outputs + 2 × digital inputs |
| Audio | 3.5mm audio jack (microphone support), PH2.0 speaker header |
| Fan header | 5V, 4PIN JST-SH PWM fan header |
| Buzzer | 1-ch controllable buzzer |
| Other | Onboard EEPROM and encryption chip |
| Power Input | 7V ~ 36V wide voltage range screw terminal, 5V 5A Type-C port |
| Dimensions | 136.00 × 92.00 × 39.50 (mm) |
What's the differences
| CM5 Base Board | Interface count and specifications | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PoE | Gigabit ETH |
40PIN GPIO |
PCIe | USB① | MIPI | HDMI | RTC | Fan Header② |
Power Input |
Features | ||
 NANO A |
√ | 3.0×1 | ×2 | SH1.0 | √ | 5V | CM5 sized | |||||
 NANO B |
×1 | √ | 16PIN PCIe | 3.0×1 | ×2 | √ | SH1.0 | √ | 5V | CM5 sized | ||
 mini Base A |
×1 | √ | 16PIN PCIe | 3.0×2 2.0×2 |
×2 | ×2 | ML/CR1220 | √ | 5V | mini size | ||
 mini Base B |
×1 | √ | M.2 M KEY | 3.0×2 2.0×2 |
×2 | ×2 | ML/CR1220 | √ | 5V | mini size, onboard EEPROM and encryption chip | ||
 Mini Dual Gigabit |
×2 | √ | 3.0×1 | SH1.0 | √ | 5V | dual ETH | |||||
 Dual ETH |
1G ×1 2.5G ×1 |
√ | M.2 M KEY | 3.0×1 2.0×2 |
×2 | ×2 | ML/CR1220 | √ | 7V~36V | dual ETH, onboard EEPROM and Encryption chip | ||
 Dual ETH 4G/5G |
1G ×1 2.5G ×1 |
√ | M.2 M KEY | 3.0×2 | ×2 | ×2 | ML/CR1220 | √ | 7V~36V | dual ETH and 4G/5G support | ||
 PoE Base |
√ | ×1 | √ | M.2 M KEY | 3.0×2 2.0×2 |
×2 | ×2 | ML/CR1220 | √ | 5V | USB×4 | |
 Raspberry Pi official |
③ | ×1 | √ | M.2 M KEY | 3.0×2 | ×2 | ×2 | ML/CR1220 | √ | 5V | Official IO base board | |
 IPCBOX-CM5 |
1G ×1 2.5G ×1 |
M.2 M KEY | 3.0×1 2.0×3 |
×1 | SH1.0 | √ | 7V~36V | dual ETH 4G/5G support RS485/RS232 Encryption chip EEPROM CAN digital inputs digital outputs audio buzzer |
||||
| Note | ① USB 3.0 is equivalent to USB 3.2 Gen1. ② Unless otherwise specified, the Fan header usually is JST-SH type connector. ③ There's PoE header only on the Raspberry Pi official IO board without PoE circuit, which means additional PoE module is required for the official IO board to enable PoE feature. Unless otherwise specified, the PoE feature here stands for integrating 802.3af-compliant PoE circuit (5V/2.5A). |
|||||||||||
Connecting with Compute Module 5
standard CM5 socket suitable for Compute Module 5 Lite / eMMC series module
* for reference only, please refer to the package content for detailed part list
4G / 5G module compatibility
compatible with communication modules with M.2 B KEY interface
* An additional communication module is required to enable 5G/4G/3G/2G cellular network function, recommended: SIM7600G-H-M.2, SIM8260G-M2, and SIM8262E-M2.
Supports connecting to M.2 NVMe Drive
Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files, Supports booting Pi5 from NVME Solid State Drive
* for reference only, please refer to the package content for detailed part list
Applicable M.2 drive sizes
NVMe Drive Slot Support
* Only supports the NVMe Protocol Solid State Drives.
More rich interfaces
Precise cut-out with clear label
each cut-out is completely aligned with the connector
Heat Dissipation Design
Aluminum alloy case enables large-area heat conduction and dissipation, combined with heat sink fins, better heat dissipation
supports Rail mounting and VASE mounting
Reserved Rail-mount buckle and VASE mounting holes for more convenient installations
* for reference only, comes with rail-mount buckle and is compatible with VESA mounting.
What's On Board
- CM5 socket
suitable for all variants of Compute Module 5 - M.2 M KEY
supports 2242 / 2230 NVMe Solid State Drives or AI modules - Nano SIM card slot
- TF card slot
for connecting a TF card with pre-burnt system (Lite variant ONLY) - Dual USB 2.0 ports
standard USB 2.0 ports - BOOT button
press before powering on to enter the burning mode - PSW power button
Long press to force power off, short press to soft power off or on - M.2 B KEY
supports connecting 4G/5G communication module - Buzzer
- PH2.0 speaker header
supports connecting to 8Ω 5W speaker - Programming port
used for eMMC burning - 3.5mm Jack
supports audio input and output
- HDMI interface
supports 4K outputs - USB ports
1 × standard USB 2.0 port, 1 × USB 3.2 Gen1 Type-A port with up to 5Gbps rate - DC power screw terminal
supports DC 7V ~ 36V power supply - Indicators
- 1000M Ethernet RJ45 port
supports 10M / 100M / 1000M network connections - 2500M Ethernet RJ45 port
supports 10M / 100M / 1000M / 2500M network connections - RTC Batt header
for connecting with compatible RTC Batt to power the RTC chip - Multi-function interface
1 × CAN interface with up to 1Mbps and 2 × digital outputs + 2 × digital inputs - RS485 / RS232 interface
Options for 2 × RS485 + 2 × RS232 version or 4 × RS485 version - 120R Jumper
RS485 and CAN terminal resistor selection (No function for RS232)
Application Example
Suitable for Raspberry Pi applications in remote communication or other industrial situations
* for reference only, the display, keyboard, and mouse are NOT included, please purchase separately.
How to install
Outline dimensions
About Compute Module 5
Newly upgraded, more powerful
- Upgraded processor BCM2712, quad-core Cortex-A76 64-bit SoC, more powerful performance
- More options for RAM (2GB / 4GB / 8GB / 16GB)
- More options for eMMC Flash (0GB (Lite) / 8GB / 16GB / 32GB / 64GB)
- Faster eMMC Flash storage, up to 200 Mbps data rate
- Optional for certified radio module, supports either PCB trace antenna or external antenna, more suitable for industrial applications
- Adopts B to B connectors, most compatible with Compute Module 4
- Onboard Gigabit Ethernet PHY supporting IEEE1588, suitable for network applications
- Onboard PCIe Gen 2 x1 interface, allows connecting more useful modules
Balenie Obsahuje / Package Content
IPCBOX-CM5-A
- IPCBOX-CM5-A metal case x1
- CM5-IPC-BASE-A-4RS485 baseboard x1
- 12V 4A power x1
- Power adapter cable 15cm x1
- Black nylon spacers x4
- Screws pack x1
- Screwdriver x1
- 6PIN 3.5mm pitch double-layer terminal block x1
- 4PIN 3.5mm pitch double-layer terminal block x1
- Rail-mount buckle x1
- Pink thermal tapes x1
WS-34121
Specific References
Gigabit/2.5G Dual Ethernet Industrial Computer Raspberry Pi CM5, 4K Display 4G/5G Module, for All CM5 (WS-34121)
Gigabit/2.5G Dual Ethernet Industrial Computer Raspberry Pi CM5, 4K Display 4G/5G Module, for All CM5 (WS-34121)
€109.47
89.00 € tax excl.