NAS Multi-functional Mini-Computer  for RPi Compute Module 4 (NOT included), Network Storage, Dual Solid State Drive  (WS-24678)

NAS Multi-Functional Mini-Computer Designed For Raspberry Pi Compute Module 4 (NOT Included), Network Storage, Dual Solid State Drive Slots, Dual Gigabit Ethernet Ports, 4G Network, Metal Case

CM4 NAS Mini-Computer Kit

Designed For Raspberry Pi Compute Module 4

Network Storage USB 3.2 Dual Gigabit Ethernet ports 4G

* the Compute Module 4 is NOT included.

Features At A Glance

• All-in-one Mini-Computer, mainly designed for home, small home office, etc.
• Provides a simple and easy-to-use solution, no expert knowledge of networking and storage systems required
• Onboard 2× M.2 M KEY slots for installing NVME Solid State Drives
• Onboard MINI PCIE connector for installing 4G module
• 2× HDMI 4K output interfaces
• Onboard USB3.2 ports, IR receiver, RTC, dual Gigabit Ethernet connectors, 3.5mm jack, etc.

Specifications

CM4 SOCKET	Suitable for all variants of Compute Module 4
NETWORKING	Gigabit Ethernet RJ45 connector × 2 (Original Network port ETH0, and PCIE extended Network port ETH1)
	MINI PCIE connector, supports 4G module (USB protocol, can not support PCIE protocol)
	Nano-SIM card slot, supports standard Nano-SIM card for 4G/3G/2G Internet access
M.2	Dual NVME Solid State Drives slots (compatible with 2230, 2242, 2260, 2280)
USB	USB 3.2 Gen1 (5Gbps) port× 2
CSI CAMERA	MIPI CSI-2 camera port × 2, 15pin 1.0mm FPC connector
HDMI	HDMI × 2, supports 4K 30fps output
AUDIO	3.5mm earphone/mic jack
RTC	Real-time clock with battery socket and ability to wake Compute Module 4
TF CARD SLOT	TF card socket for Compute Module 4 Lite (without eMMC) variants
POWER INPUT	Type-C (5V 4A)
DIMENSIONS	128 × 122 × 36mm

Selection Guide

CM4 BASE BOARD	INTERFACE COUNT AND SPECIFICATIONS
	POE	GIGABIT ETH	40PIN GPIO	PCIE	USB①	DSI	HDMI	CSI	RTC	FAN HEADER	POWER INPUT	FEATURES
NANO A			√		2.0×1			×1			5V	CM4 sized
NANO B		×1	√		2.0×1	×1	×1	×1			5V	CM4 sized
NANO C			√		2.0×1	×1	×1	×1			5V	Onboard Camera
MINI BASE A		×1	√	M.2 M	2.0×4	×1	×2	×2		5V	5V	mini size
MINI BASE B		×1	√	M.2 M	2.0×4	×1	×2	×2	√	5V	5V	mini size
MINI BASE C		×1	√	M.2 M	2.0×2		×1	×2	√	5V	5V	Dedicated 40PIN LCD Connector
TOUCH SCREEN		×1		M.2 M	2.0×4		×1	×1			5V	IPS screen
MINI DUAL GIGABIT		×2	√		2.0×1					5V SH1.0	5V	dual ETH
BINOCULAR CAMERA		×1	√	M.2 M	2.0×4		×2				5V	dual 8MP cameras
4CH RS485		×1			2.0×2		×1	×2	×1	5V	7-36V	dual ETH
WIFI6 DUAL ETH		×1	√	M.2 E	2.0×3	×1	×2	×2	×1	5/12V	7-36V	WIFI6 dual ETH
DUAL GIGABIT ETH		×2	√		3.0×3	×1	×2	×2	√	5/12V	7-36V
IOT DUAL GIGABIT ETH		×2	√		3.0×2	×1	×2	×2	√	5/12V	5V	5G/4G support
IOT BASE	√	×1		Gen2×1	2.0×2	×2	×2	×2	√	5/12V	7-36V	5G/4G support RS232 RS485 ADC
POE BASE (B)	√	×1	√	Gen2×1	2.0×4	×2	×2	×2	√	5/12V	5V	RS232 RS485
POE UPS BASE	√	×1	√	M.2 M	2.0×4	×1	×2	×2	√	5/12V	7-36V	UPS
POE BASE	√	×1	√		3.0×4	×2	×2	×2	√	5/12V	7-36V
RASPBERRY PI OFFICIAL	②	×1	√	Gen2×1	2.0×4	×2	×2	×2	√	12V	12V
WIRELESS BASE		×1		M.2 B / Mini-PCIe	2.0×3		×1	×1	√	5/12V	5V or 7-36V	5G/4G support RS485 CAN rail-mount
UPS WIRELESS BASE		×1		M.2 B	2.0×3		×1	×1	√	5/12V	5V or 7-36V	With UPS 5G/4G support RS485 CAN rail-mount
NAS MINI COMPUTER		×2	√	M.2 M×2/ Mini-PCIe	3.0×2		×2	×2	√		5V	dual M.2 M KEY slots
5″ TOUCH SCREEN	②	×1	√	M.2 M	2.0×4		×1	×2	√	5/12V	5V
7″ ALL-IN-ONE		×1		M.2 M	2.0×4	used	×1	used	√	5/12V used	7-36V	touch screen camera speaker
13.3″ ALL-IN-ONE		×1			2.0×2						12V	HD touch screen
13.3″ MAGIC MIRROR		×1			2.0×2						12V	HD screen, Speech Assistant
NOTE	① USB 3.0 is equivalent to USB 3.2 Gen1 ② There's PoE header only on the Raspberry Pi official IO board without PoE circuit, that means additional PoE module is required for the official IO board to enable PoE feature. Unless otherwise specified, the PoE feature here stands for integrating 802.3af-compliant PoE circuit (5V/2.5A).

Dual Solid State Drives Slots

Onboard 2× M.2 M KEY Slots, Support All Sizes Of NVME Solid State Drives
(2230, 2242, 2260, 2280)

VESA Mounting Support

Supports 100×100mm And 75×75mm Standard VESA Holes

for reference only, the stand and display are NOT included.

Onboard Rich Interfaces

 

Precise Cut-Out With Clear Label

Each Cut-Out Is Completely Aligned With The Connector

Application Example

Supports Connecting With Multiple Peripheral Devices, Suitable For Various Application Scenarios.

for reference only, please check the Package Content for the detailed part list

Product Show

Installation Instruction

* for reference only, the CM4 is NOT included.

Outline Dimensions

Resources & Services

---

WIKI: www.waveshare.com/wiki/CM4-NVME-NAS-BOX

Balenie Obsahuje / Package Content

1. CM4-NVME-NAS-BASE x1
2. Metal case (top and bottom) x1
3. Momentary push button switch ~12mm (with LED and four pre-wired cables) x1
4. 30×40mm Silicone thermal tape x1
5. 15×15mm Silicone thermal tape (2PCS) x1
6. 7×7mm Silicone thermal tape (2PCS) x1
7. Antenna connector rubber plug (2PCS) x1
8. Screws pack x1