RLX COMPONENTS s.r.o. , Electronic Components Distributor.
RLX COMPONENTS s.r.o. , Electronic Components Distributor.
Environment Sensors Module for Raspberry Pi Pico, I2C Bus (WS-20232)
WS-20232
€41.74
34.78 € tax excl.
Environment Sensors Module for Raspberry Pi Pico, I2C Bus (WS-20232)
Environment Sensors Module for Raspberry Pi Pico, I2C Bus (WS-20232)
Environment Sensors Module For Raspberry Pi Pico, I2C Bus
Environment Sensors Module For Pico
Features At A Glance
The Pico-Environment-Sensor gives Raspberry Pi Pico the ability to collect environment data like temperature & humidity, air pressure, ambient light intensity, VOC, UV ray, etc. It can also be used to build a robot that can detect motion and orientation.
- Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series
- Onboard TSL25911FN digital ambient light sensor, for measuring IR and visible light
- Onboard BME280 sensor, for measuring temperature, humidity, and air pressure
- Onboard ICM20948 motion sensor, accelerometer, gyroscope, and magnetometer
- Onboard LTR390-UV-1 sensor, for measuring UV rays
- Onboard SGP40 sensor, for detecting ambient VOC
- I2C bus, allows retrieving data by just using two wires
- Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
Specifications
| TSL25911FN DIGITAL AMBIENT LIGHT SENSOR | |
|---|---|
| I2C address | 0x29 |
| Effective range | 0~88000Lux |
| BME280 TEMPERATURE, HUMIDITY, AND AIR PRESSURE SENSOR | |
| I2C address | 0x76 |
| Temperature detection | -40 ~ 85℃ (0.01℃ resolution, ±1℃ accuracy) |
| Humidity detection | 0~100%RH (0.008%RH resolution, ±3%RH accuracy, 1s response time, ≤2%RH delay) |
| Air pressure detection | 300~1100hPa (0.18Pa resolution, ±1hPa accuracy) |
| ICM20948 MOTION SENSOR (9-DOF: 3-AXIS ACCELEROMETER, 3-AXIS GYROSCROPE, 3-AXIS MAGNETOMETER) | |
| I2C address | 0x68 |
| Accelerometer resolution | 16-bit |
| Accelerometer range (configurable) | ±2, ±4, ±8, ±16g |
| Gyroscope resolution | 16-bit |
| Gyroscope range (configurable) | ±250, ±500, ±1000, ±2000°/sec |
| Magnetometer resolution | 16-bit |
| Magnetometer range | ±4900µT |
| LTR390-UV-1 UV SENSOR | |
| I2C address | 0x53 |
| Response wavelength | 280nm - 430nm |
| SGP40 VOC SENSOR | |
| I2C address | 0x59 |
| Measuring range | 0 ~ 1,000 ppm ethanol equivalent |
| Limit condition | < 0.05 ppm ethanol equivalent OR < 10 % preset concentration point (the larger one should prevail) |
| Response time | < 10 s (tau 63 %) |
| Start time | < 60 s |
| On-chip humidity compensation support | |
Raspberry Pi Pico Header Compatibility
Onboard Female Pin Header For Direct Attaching To Raspberry Pi Pico
Raspberry Pi Pico is NOT included.
What's On Board
- TSL25911FN
digital ambient light sensor, for measuring IR and visible light - LTR390-UV-1
UV sensor - SGP40
VOC sensor - ICM20948
3-axis accelerometer, 3-axis gyroscrope, 3-axis magnetometer
- Voltage level translator
5V to 3.3V/1.8V - BME280
temperature, humidity, and air pressure sensor - Logic level conversion
3.3V-1.8V - I2C selection
Pinout Definition
Outline Dimensions
Package Content
- Pico-Environment-Sensor x1
WS-20232
Specific References
Environment Sensors Module for Raspberry Pi Pico, I2C Bus (WS-20232)
Environment Sensors Module for Raspberry Pi Pico, I2C Bus (WS-20232)
€41.74
34.78 € tax excl.