![Serial Enabled 16x2 LCD - White on Black 5V (Sparkfun LCD-09395) Serial Enabled 16x2 LCD - White on Black 5V (Sparkfun LCD-09395)](https://rlx.sk/7071-large_default/serial-enabled-16x2-lcd-white-on-black-5v-sparkfun-lcd-09395.jpg)
![Serial Enabled 16x2 LCD - White on Black 5V (Sparkfun LCD-09395) Serial Enabled 16x2 LCD - White on Black 5V (Sparkfun LCD-09395)](https://rlx.sk/7071-side_product_default/serial-enabled-16x2-lcd-white-on-black-5v-sparkfun-lcd-09395.jpg)
![Serial Enabled 16x2 LCD - White on Black 5V (Sparkfun LCD-09395) Serial Enabled 16x2 LCD - White on Black 5V (Sparkfun LCD-09395)](https://rlx.sk/7072-side_product_default/serial-enabled-16x2-lcd-white-on-black-5v-sparkfun-lcd-09395.jpg)
![Serial Enabled 16x2 LCD - White on Black 5V (Sparkfun LCD-09395) Serial Enabled 16x2 LCD - White on Black 5V (Sparkfun LCD-09395)](https://rlx.sk/7073-side_product_default/serial-enabled-16x2-lcd-white-on-black-5v-sparkfun-lcd-09395.jpg)
RLX COMPONENTS s.r.o. , Electronic Components Distributor.
RLX COMPONENTS s.r.o. , Electronic Components Distributor.
Serial Enabled 16x2 LCD - White on Black 5V (Sparkfun LCD-09395)
This is the latest evolution of our serial LCD. Included on a single board is a 16x2 LCD and an embedded circuit based around a PIC 16F88. The on-board PIC takes a TTL serial input and prints the characters it receives onto the LCD. The installed firmware also allows for a number of special commands so you can clear the screen, adjust the backlight brightness, turn the display on/off, and more.
Communication with SerLCD requires 5V TTL serial at a default baud rate of 9600bps (8-N-1). You can adjust the baud to any standard rate between 2400 and 38400bps. The power (VDD), ground (GND) and RX pins are all broken out to both a 0.1" pitch header as well as a 3-pin JST connector.
SerLCD has the ability to dim the backlight to conserve power if needed. There is also a potentiometer on the back of the display to adjust the contrast.
Features:
Dimensions:
Documents: