Color LCD - Breakout Board (EF-03044) BK_COLORLCD Nokia 6100 LCD 128x128

This breakout board for the popular Nokia 6100 Knock-off color LCD has an improved backlight driver circuit (boosts to 7V) , plus we give you a tri-color status LED and 2 pushbuttons, all accessed through one 9-pin 0.1" spaced header. Vbat and the 3.3V input can be driven from the same regulated 3.3V source, but the device will draw more current than if the Vbat input was driven from a higher source voltage. For an estimate of the current draw for a given input voltage, refer to the chart on the schematic file below.

This breakout is set up for serial communication to the display and comes with the Nokia 6100 display attached and stand-offs as photographed.

Feature

All Shield base on Philips PCF8833 controller

Nokia LCD6100

Backlight PWM control "BKL"

128 x 128 pixels

12-bit color rendition (4 bits red, 4-bits green, 4-bits blue)

Documents:

Schematic

Datasheet

Arduino library

Interface tutorial by Jim Lynch

mbed Example