Gertboard (2250034)

Nový produkt

Raspberry Pi GERTBOM KIT GERTBOARD GPIO BOARD (2250034)

44,28 € s DPH

-10%

39,85 € s DPH
33,21 € bez DPH

Znížená cena

GERTBOARD GPIO BOARD for Raspberry Pi

http://www.farnell.com/datasheets/1683444.pdf

Description

The Gertboard™ is an add-on board that extends the use of Raspberry Pi  to devices in the real world, including motor/lamp control, and the sensing of voltages and currents. It also contains a host micro that can be programmed with code written and compiled for it, on the Raspberry Pi. 

Features

Gertboard is an input/output (I/O) extension board for the Raspberry Pi computer. It fits onto the GPIO pins of the Raspberry Pi (the double row of pins on the upper left corner) via a socket on the back of the Gertboard. A bit of care is required when putting the two devices together. It is easy to insert just one row of pins into the socket, but all of the pins need to be connected. The Gertboard gets its power from those GPIO pins, so user will need a power supply for the Raspberry Pi (RPi) that is capable of supplying a current of at least 1A. It is a flexible experimenter board that plugs directly into Raspberry Pi, and out into the physical world, allowing user to detect and respond to external physical events. Detect and output analogue voltages. Drive powerful motors. Detect switch presses. Illuminate LEDs and drive relays. Jumper cables allow user to hook up different parts of the circuit in many different ways, allowing total flexibility. All controlled by Raspberry Pi.

  • Plugs directly onto Raspberry Pi GPIO socket
  • Motor controller, capable controlling a motor bidirectionally, delivering 18V and 2A maximum
  • Dual channel D/A converter, 8bit
  • Dual channel  A/D converter, 10bit
  • Onboard Atmel ATmega328ATmega328 MCU for running off board programmes
  • 6 x open collector outputs
  • 12 x LED indicators
  • 3 x momentary push switches
  • 10 x strap cables and 18 x jumpers included
  • Software and manuals available to operate and learn how to use Gertboard
  • http://www.farnell.com/datasheets/1683444.pdf

Details

The Gertboard is an input/output (I/O) extension board for the Raspberry Pi computer. It fits onto the GPIO (general purpose I/O) pins of the Raspberry Pi (the double row of pins on the upper left corner) via a socket on the back of the Gertboard. A bit of care is required when putting the two devices together. It is easy to insert just one row of pins into the socket, but all of the pins need to be connected. The Gertboard gets its power from those GPIO pins, so you will need a power supply for the Raspberry Pi (RPi) that is capable of supplying a current of at least 1A. The Gertboard has collection of functional blocks (the major capabilities of the board) which can be connected together in a myriad of ways using header pins. The functional blocks are:

  •  12x buffered I/O
  •  3x pushbuttons
  •  6x open collector drivers (50V, 0.5A)
  •  18V, 2A motor controller
  •  28-pin dual in line ATmega microcontroller
  •  2-channel 8, 10, or 12 bit Digital to Analogue converter
  •  2-channel 10 bit Analogue to Digital converter
  • Datasheet

Zákazníci, ktorí kúpili tento produkt, kúpili tiež:

30 iných produktov v tejto kategórií: