• New
    3inch E-Paper Module (G), 400 × 168, Red/Yellow/Black/White (WS-22758)
    3inch E-Paper Module (G), 400 × 168, Red/Yellow/Black/White (WS-22758)
    3inch E-Paper Module (G), 400 × 168, Red/Yellow/Black/White (WS-22758)
    3inch E-Paper Module (G), 400 × 168, Red/Yellow/Black/White (WS-22758)

    3inch E-Paper Module (G), 400 × 168, Red/Yellow/Black/White (WS-22758)

    WS-22758
    €27.48

    22.90 € tax excl.

    3inch E-Paper Module (G), 400 × 168, Red/Yellow/Black/White (WS-22758)

    Quantity :
    OUT OF STOCK

    3inch E-Paper Module (G), 400 × 168, Red/Yellow/Black/White (WS-22758)

    3inch E-Paper Module (G), 400 × 168, Red/Yellow/Black/White

    3″ E-Paper Module (G)

    Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity

    Ideal for price tags, shelf labels, industrial instruments...

     3inch-e-Paper-Module-G-details-1.jpg
      • SizeDimension.png3″
      • ResolutionResolution.png400×168
      • Viewing AngleViewing_angle.png>170°
      • Display ColorDisplay-RYBW.pngRed/Yellow/Black/White
      • Grey ScaleGray-scale-2.png2
    • CommunicationSPI.pngSPI
    • Display Panele-Paper.pngE-paper
    • ExperiencePaper.pngPaper-like
    • EnvironmentBulb.pngAmbient Light Required
    • Display TypeReflective.pngPassively Reflective
    Features At A Glance
    • No backlight, keeps displaying last content for a long time even when power down
    • Ultra low power consumption, basically power is only required for refreshing
    • SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
    • Onboard voltage translator, compatible with 3.3V/5V MCUs
    • Comes with development resources and manual(driver board schematic, examples for Raspberry Pi/Arduino/STM32)
    Specifications
    OPERATING VOLTAGE 3.3V/5V DISPLAY COLOR Red/Yellow/Black/White
    INTERFACE 3-wire SPI, 4-wire SPI GREY SCALE 2
    OUTLINE DIMENSIONS 88.5 × 41mm FULL REFRESH TIME 12s
    DISPLAY SIZE 70.4 × 29.568mm REFRESH POWER <60mW (typ.)
    DOT PITCH 0.176 × 0.176mm STANDBY CURRENT <0.01uA (almost none)
    RESOLUTION 400×168 pixels VIEWING ANGLE >170°
    Advantages Of EINK

    E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
    E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

    Onboard SPI Control Interface

    For Use With Controller Boards Like Raspberry Pi/STM32/Arduino

    3inch-e-Paper-Module-G-details-3.jpg
    VCC Power (3.3V / 5V input)
    GND Ground
    DIN SPI MOSI pin
    CLK SPI SCK pin
    CS SPI chip selection, low active
    DC Data/Command selection (high for data, low for command)
    RST External reset, low active
    BUSY Busy status output pin
    Onboard Voltage Translator

    Compatible With 3.3V / 5V MCUs

    3inch-e-Paper-Module-G-details-5.jpg
    Application Examples

    Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

    Outline Dimensions
    3inch-e-Paper-Module-G-details-size.jpg

    Balenie Obsahuje / Package Content

    1. 3inch e-Paper Module (G) x1
    2. PH2.0 20cm 8Pin x1
    Waveshare Electronics
    WS-22758

    Specific References

    3inch E-Paper Module (G), 400 × 168, Red/Yellow/Black/White (WS-22758)

    €27.48

    22.90 € tax excl.