3inch E-Paper Module (G), 400 × 168, Red/Yellow/Black/White (WS-22758)
      3inch E-Paper Module (G), 400 × 168, Red/Yellow/Black/White (WS-22758)
      3inch E-Paper Module (G), 400 × 168, Red/Yellow/Black/White (WS-22758)
      3inch E-Paper Module (G), 400 × 168, Red/Yellow/Black/White (WS-22758)

      3inch E-Paper Module (G), 400 × 168, Red/Yellow/Black/White (WS-22758)

      WS-22758
      26,37 €

      21.44 € bez DPH

      3inch E-Paper Module (G), 400 × 168, Red/Yellow/Black/White (WS-22758)

      Množstvo:
      OUT OF STOCK

      3inch E-Paper Module (G), 400 × 168, Red/Yellow/Black/White (WS-22758)

      3inch E-Paper Module (G), 400 × 168, Red/Yellow/Black/White

      3″ E-Paper Module (G)

      Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity

      Ideal for price tags, shelf labels, industrial instruments...

       3inch-e-Paper-Module-G-details-1.jpg
        • SizeDimension.png3″
        • ResolutionResolution.png400×168
        • Viewing AngleViewing_angle.png>170°
        • Display ColorDisplay-RYBW.pngRed/Yellow/Black/White
        • Grey ScaleGray-scale-2.png2
      • CommunicationSPI.pngSPI
      • Display Panele-Paper.pngE-paper
      • ExperiencePaper.pngPaper-like
      • EnvironmentBulb.pngAmbient Light Required
      • Display TypeReflective.pngPassively Reflective
      Features At A Glance
      • No backlight, keeps displaying last content for a long time even when power down
      • Ultra low power consumption, basically power is only required for refreshing
      • SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
      • Onboard voltage translator, compatible with 3.3V/5V MCUs
      • Comes with development resources and manual(driver board schematic, examples for Raspberry Pi/Arduino/STM32)
      Specifications
      OPERATING VOLTAGE 3.3V/5V DISPLAY COLOR Red/Yellow/Black/White
      INTERFACE 3-wire SPI, 4-wire SPI GREY SCALE 2
      OUTLINE DIMENSIONS 88.5 × 41mm FULL REFRESH TIME 12s
      DISPLAY SIZE 70.4 × 29.568mm REFRESH POWER <60mW (typ.)
      DOT PITCH 0.176 × 0.176mm STANDBY CURRENT <0.01uA (almost none)
      RESOLUTION 400×168 pixels VIEWING ANGLE >170°
      Advantages Of EINK

      E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
      E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

      Onboard SPI Control Interface

      For Use With Controller Boards Like Raspberry Pi/STM32/Arduino

      3inch-e-Paper-Module-G-details-3.jpg
      VCC Power (3.3V / 5V input)
      GND Ground
      DIN SPI MOSI pin
      CLK SPI SCK pin
      CS SPI chip selection, low active
      DC Data/Command selection (high for data, low for command)
      RST External reset, low active
      BUSY Busy status output pin
      Onboard Voltage Translator

      Compatible With 3.3V / 5V MCUs

      3inch-e-Paper-Module-G-details-5.jpg
      Application Examples

      Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

      Outline Dimensions
      3inch-e-Paper-Module-G-details-size.jpg

      Balenie Obsahuje / Package Content

      1. 3inch e-Paper Module (G) x1
      2. PH2.0 20cm 8Pin x1
      Waveshare Electronics
      WS-22758

      Špecifické referencie

      3inch E-Paper Module (G), 400 × 168, Red/Yellow/Black/White (WS-22758)

      26,37 €

      21.44 € bez DPH