3.5inch Capacitive Touch Display Module, 320×480 Resolution, Embedded with ST7796S, FT6336U  IPS (WS-29318)

3.5inch Capacitive Touch Display Module, 320×480 Resolution, Embedded with ST7796S Display Driver and FT6336U Capacitive Touch Controller, IPS Display

3.5inch Capacitive Touch LCD Module

Embedded ST7796S driver and FT6336U capacitive touch control chip

Comes with examples for Raspberry Pi / ESP32 / Raspberry Pi Pico / Arduino

 

• • Size3.5"  
  • Resolution320×480  
  • Display Color262K  
  • Display PanelIPS

• Display DriverST7796S  
• Display InterfaceSPI  
• Touch DriverFT6336U  
• Touch InterfaceI2C

Features

• 320×480 resolution, 262K colors, clear and colorful displaying effect
• High touch screen transmittance, fast response and long lifetime
• Embedded with ST7796S driver chip and FT6336U capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins
• Onboard TF card slot for storing more pictures, videos, music, etc.
• Adapting 15PIN connector and 18PIN FPC slot for connecting the LCD module to the host board
• Onboard voltage translator, compatible with 3.3V / 5V operating voltage
• Comes with online development resources and manual (examples for Raspberry Pi / ESP32 / Raspberry Pi Pico / Arduino)

Specifications

Operating Voltage	3.3V / 5V	Resolution	320 × 480 pixels
Display Driver	ST7796S	Touch Driver	FT6336U
Display Interface	4-wire SPI	Touch Interface	I2C
Display Panel	IPS	Touch Type	Capacitive
Pixel Pitch	0.051 × 0.153 (mm)	Touch Points	Two-point touch
Display Size	48.96 × 73.44 (mm)	Module Size	61.00 × 92.44 (mm)

3.5inch Touch Display

Embedded with ST7796S Driver Chip And FT6336U Capacitive Touch Control Chip

Onboard Voltage Translator

Compatible With 3.3V / 5V Operating voltage

Onboard TF Card Slot

For storing more pictures or files

Suitable For Multiple Programming Platforms

Comes With Demos And Manuals For Raspberry Pi / Raspberry Pi Pico / ESP32 / Arduino
More Convenient For Development And Integration, with High Expansibility

Raspberry Pi

 

Raspberry Pi Pico 2

 

ESP32

 

Arduino Boards

SPI and I2C Control Interfaces

Options For 15PIN Connector Or 18PIN FPC Slot For Connecting The LCD To The Host Board

Pin	Description	15PIN Pin No.	18PIN Pin No.
VCC	Power (3.3V / 5V input)	1	1
3V3	Power (3.3V input)	2	NC
GND	Ground	3	3
MISO	SPI MISO pin	4	6
MOSI	SPI MOSI pin	5	5
SCLK	SPI CLK pin	6	4
SD_CS	TF card chip selection, low active	7	10
LCD_CS	LCD chip selection, low active	8	9
LCD_DC	LCD data/command selection (high for data, low for command)	9	7
LCD_RST	LCD reset pin, low active	10	8
LCD_BL	LCD backlight pin	11	2
TP_SDA	Touch panel data pin	12	14
TP_SCL	Touch panel clock pin	13	13
TP_INT	Touch panel interrupt pin	14	15
TP_RST	Touch panel reset pin, low active	15	12

Hardware Connection

Connecting with Raspberry Pi 5

 

Connecting with ESP32-S3

 

* for reference only, the Raspberry Pi 5 and ESP32-S3 driver board are NOT included, please check the Package Content for the detailed part list.

Outline dimensions

Resources & Services

Wiki: www.waveshare.com/wiki/3.5inch_Capacitive_Touch_LCD

Balenie Obahuje / Package Content

1. 3.5inch Capacitive Touch LCD x1
2. GH1.25 15Pin cable x1