• Novinka
    RP2040 MCU Board, With 1.28inch Round LCD, accelerometer and gyroscope Sensor (WS-22668)
    RP2040 MCU Board, With 1.28inch Round LCD, accelerometer and gyroscope Sensor (WS-22668)
    RP2040 MCU Board, With 1.28inch Round LCD, accelerometer and gyroscope Sensor (WS-22668)
    RP2040 MCU Board, With 1.28inch Round LCD, accelerometer and gyroscope Sensor (WS-22668)
    RP2040 MCU Board, With 1.28inch Round LCD, accelerometer and gyroscope Sensor (WS-22668)

    RP2040 MCU Board, With 1.28inch Round LCD, accelerometer and gyroscope Sensor (WS-22668)

    WS-22668
    22,80 €

    19.00 € bez DPH

    RP2040 MCU Board, With 1.28inch Round LCD, accelerometer and gyroscope Sensor (WS-22668)

    Množstvo:
    OUT OF STOCK

    RP2040 MCU Board, With 1.28inch Round LCD, accelerometer and gyroscope Sensor (WS-22668)

    RP2040 MCU Board, With 1.28inch Round LCD, Accelerometer And Gyroscope Sensor

    RP2040 MCU Board With LCD

    Based on Raspberry Pi RP2040

    RP2040-LCD-1.28-details-1.jpgRP2040-LCD-1.28-details-2.jpg
    Features

    RP2040-LCD-1.28 is a low-cost, high-performance MCU board designed by Waveshare. Tiny size with onboard 1.28inch LCD round display, Li-ion battery recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope) and so on, adapting all GPIO and Debug pins, which makes it easy for you to develop and integrate it into products quickly.

    Key features include:

    • RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
    • Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
    • 264KB of SRAM, and 2MB of on-board Flash memory
    • Type-C connector, keeps it up to date, easier to use
    • Onboard 1.28inch 240×240 pixels 65K colorful IPS LCD display for clear color pictures
    • Lithium battery recharge/discharge header, suitable for mobile devices
    • All GPIO pins are adapted through 1.27 pitch female headers (There are 30 pins in total, but some pins have been connected to the internal circuit, please refer to the wiki for details when multiplexing)
    • USB 1.1 with device and host support
    • Low-power sleep and dormant modes
    • Drag-and-drop programming using mass storage over USB
    • 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels
    • Accurate clock and timer on-chip
    • Temperature sensor
    • Accelerated floating-point libraries on-chip
    • 8 × Programmable I/O (PIO) state machines for custom peripheral support 
    C/C++, MicroPython Support

    Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started

    RP2040-LCD-1.28-details-4.jpg
    Dual-Core Arm Processor

    Dual-Core Arm Cortex M0+ Processor, Flexible Clock Running Up To 133 MHz

    RP2040-LCD-1.28-details-5.jpg
    30 × Multi-Function GPIO Pins

    Configurable Pin Function, Allows Flexible Development And Integration

    RP2040-LCD-1.28-details-3.jpg
    What's On Board
    RP2040-LCD-1.28-details-intro.jpg
    1. USB Type-C connector
      USB 1.1 with device and host support
    2. ETA6096
      high efficiency Lithium battery recharge manager
    3. Battery Header
      MX1.25 header, for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time
    4. QMI8658C
      IMU, includes a 3-axis gyroscope and a 3-axis accelerometer
     
    1. 1.27mm pitch headers
      Adapting all GPIO and Debug pins
    2. W25Q16JVUXIQ
      2MB NOR-Flash
    3. RP2040
      Dual-core processor, up to 133MHz operating frequency
    4. RESET Button
    5. BOOT Button
      press it when resetting to enter download mode
    Outline Dimensions
    RP2040-LCD-1.28-details-size.jpg
    Resources & Services
    res_banner.png
    Waveshare Electronics
    WS-22668

    Špecifické referencie

    RP2040 MCU Board, With 1.28inch Round LCD, accelerometer and gyroscope Sensor (WS-22668)

    22,80 €

    19.00 € bez DPH