• Novinka
    0.96inch OLED Display Module, 128×64 SPI / I2C (WS-24103)  Blue
    0.96inch OLED Display Module, 128×64 SPI / I2C (WS-24103)  Blue
    0.96inch OLED Display Module, 128×64 SPI / I2C (WS-24103)  Blue
    0.96inch OLED Display Module, 128×64 SPI / I2C (WS-24103)  Blue
    0.96inch OLED Display Module, 128×64 SPI / I2C (WS-24103)  Blue

    0.96inch OLED Display Module, 128×64 SPI / I2C (WS-24103) Blue

    WS-24103
    9,48 €

    7.90 € bez DPH

    0.96inch OLED Display Module, 128×64 SPI / I2C (WS-24103)  Blue

    Množstvo:
    OUT OF STOCK

    0.96inch OLED Display Module, 128×64 SPI / I2C (WS-24103)  Blue

    0.96inch OLED Display Module, 128×64 Resolution, SPI / I2C Communication

    0.96inch OLED Display Module

    Embedded SSD1315 Driver Chip, SPI / I2C Communication

    Comes with examples for Raspberry Pi, Arduino, STM32, etc. 

    0.96inch-OLED-Module-C-details-1.jpg 

      • SizeDimension.png0.96"
      • ResolutionResolution.png128×64
      • Display ColorColor-YB-W-B.pngyellow&blue(two blocks)
        /white/blue (optional)

    • InterfaceSPI_I2C_7PIN.pngSPI/I2C
    • Display PanelOLED.pngOLED
    • DriverDriver-IC.pngSSD1315

    Version Options
    0.96inch-OLED-Module-C-details-3.jpg 

    Features At A Glance
    • Ultra-narrow bezel, conpact size, with onboard voltage translator
    • Adopts 4-wire SPI and I2C interfaces, better compatibility, fast data rate
    • Comes with online development resources (examples for Raspberry Pi/Arduino/STM32)
    Specifications
    OPERATING VOLTAGE 3.3V / 5V DISPLAY PANEL OLED
    RESOLUTION 128 × 64 pixels PIXEL SIZE 0.15 × 0.15 mm
    COMMUNICATION INTERFACE 4-wire SPI / I2C DRIVER SSD1315
    DISPLAY SIZE 21.74 × 11.18 mm MODULE SIZE 26.00 × 26.00mm
    DISPLAY COLOR (C): upper yellow & lower blue; (D): white; (E): blue

    Control Interface
    0.96inch-OLED-Module-C-details-4.jpg
    RES Reset, low active
    DC Data/Command selection (high for data, low for command)
    CS Chip selection, low active
    CLK Clock input
    DIN Data input
    GND Ground
    VCC Power (3.3V / 5V input)

    Hardware Connection

    Connecting With Raspberry Pi Via SPI Interface

    0.96inch-OLED-Module-C-details-5.jpg

    Connecting With Arduino Board Via SPI Interface

    0.96inch-OLED-Module-C-details-7.jpg


    Usage Example
    0.96inch-OLED-Module-C-details-9.jpg

    for reference only, the STM32 board is NOT included.


    Product Show
    0.96inch-OLED-Module-C-details-11.jpg
    0.96inch-OLED-Module-C-details-13.jpg
    Outline Dimensions
    0.96inch-OLED-Module-C-details-size.jpg
    Resources & Services
    res_banner.png

    Balenie Obsahuje / Package Content

    1. 0.96inch OLED Module  1x
    2. Jumper cable female-female 7PIN  1x
    Waveshare Electronics
    WS-24103

    Špecifické referencie

    0.96inch OLED Display Module, 128×64 SPI / I2C (WS-24103) Blue

    9,48 €

    7.90 € bez DPH