GBOARD PRO 800 (Itead IM141125008) Arduino SIM800 GSM / GPRS, XBee socket, nRF24L01 + uSD card, LCD module

Gboard Pro 800 is a unique Arduino mainboard with SIM800 GSM / GPRS module, XBee socket, nRF24L01 + module interface, micro SD card interface, ITDB02 parallel LCD module interface, electronic brick interface and ATmega2560 chips, which can achieve wireless control via XBee, nRF24L01 + or GSM / GPRS with functions covering from smart home to remote control of robots to meet various needs of different projects.

Note:

• 1. There is a USB connector on the board for debugging or firmware uploading only.
• 2. The serial interface (bootloader connection) is 3.3v, not the typical 5v as on many Arduino boards - anyone using an alternative to the Foca board must take note not to risk damage.

 

Specification

PCB size	131.0mm X 68.8mm X 1.6mm
Supply voltage	7~23V DC
Operating voltage	3.3V DC
Microprocessor	ATmega2560
Indicators	PWR，NET，Status，Test
Communication interfaces	XBee，nRF24L01+，UART，IIC，ITDB02 LCD，micro SD

 

Electrical Characteristics

Parameter	Min.	Typical	Max.	Unit
Supply voltage	7	-	23	VDC
Input high voltage VH	3	3.3	3.6	V
Input low voltage	-0.3	0	0.5	V
Average Current consumption	-	100	500	mA
Peak Current consumption	-	-	2	A

 

Packing List

• 1x Gboard Pro 800
• 1x GSM Antenna

 

Documents

Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents by correcting the errors, adding more demo codes or tutorials. For technical support, please open a ticket on Itead Support System.