ATtiny817 Xplained Mini (ATTINY817-XMINI) evaluation kit

ATtiny817 Xplained Mini (ATTINY817-XMINI) evaluation kit

Name: ATtiny817 Xplained Mini (ATTINY817-XMINI) evaluation kit
Brand: RLX COMPONENTS s.r.o. Electronic Components Distributor
SKU: ATTINY817-XMINI
Price: 13.08 EUR
Availability: PreOrder

Kód ATTINY817-XMINI

13,08 €

10.90 € bez DPH

The Atmel® ATtiny817 Xplained Mini evaluation kit is a hardware platform to evaluate the ATtiny817 microcontroller.

Supported by the Atmel Studio integrated development platform, the kit provides easy access to the features of the Atmel ATtiny817 and explains how to integrate the device in a custom design.

The Xplained Mini series evaluation kits include an on-board mini embedded debugger, and no external tools are necessary to program the ATtiny817.

Features

ATtiny817 microcontroller
One yellow user LED
One mechanical button
Two QTouch® buttons
mEDBG
- – Auto-ID for board identification in Atmel Studio
- – One green board status LED
- – Programming and Debugging
- – Virtual COM port (CDC)
USB powered
ATtiny817 power sources:
- – 5.0V from USB
- – 3.3V regulator
- – External voltage
Arduino shield compatible footprints

Xplained Mini Quick Start

Steps to start exploring the Atmel Xplained Mini platform:
1. Download Atmel Studio.
2. Launch Atmel Studio.
3. Connect a USB cable (Standard-A to Micro-B or Micro-AB) between the PC and the USB port on
  
  the kit.
When the Xplained Mini kit is connected to your computer for the first time, the operating system will perform a driver software installation. The driver file supports both 32- and 64-bit versions of Microsoft® Windows® XP, Windows Vista®, Windows 7, Windows 8, and Windows 10. The drivers for the kit are included with Atmel Studio.

Once the Xplained Mini board is powered the green status LED will blink and Atmel Studio will auto detect which Xplained Mini board is connected. Atmel Studio will present relevant information like datasheets and kit documentation. The ATtiny817 device is programmed and debugged by the on-board Mini Embedded Debugger and therefore no external programmer or debugger tool is required.