SIM7600E LTE Cat-1 HAT for Raspberry Pi, 3G / 2G / GNSS  Asia, Europe, Africa (WS-17954)
      SIM7600E LTE Cat-1 HAT for Raspberry Pi, 3G / 2G / GNSS  Asia, Europe, Africa (WS-17954)
      SIM7600E LTE Cat-1 HAT for Raspberry Pi, 3G / 2G / GNSS  Asia, Europe, Africa (WS-17954)
      SIM7600E LTE Cat-1 HAT for Raspberry Pi, 3G / 2G / GNSS  Asia, Europe, Africa (WS-17954)

      SIM7600E LTE Cat-1 HAT for Raspberry Pi, 3G / 2G / GNSS Asia, Europe, Africa (WS-17954)

      WS-17954
      70,80 €

      59.00 € bez DPH

      SIM7600E LTE Cat-1 HAT for Raspberry Pi, 3G / 2G / GNSS  Asia, Europe, Africa (WS-17954)
      Množstvo:
      OUT OF STOCK
      SIM7600E LTE Cat-1 HAT for Raspberry Pi, 3G / 2G / GNSS  Asia, Europe, Africa (WS-17954)

      SIM7600E LTE Cat-1 HAT For Raspberry Pi, Supports 3G / 2G, And GNSS Positioning As Well

      For different regions, we provide multiple 4G HATs to choose from:

      Please check the supported bands according to your local service provider, select the proper one when placing order.

      LTE CAT-1 HAT FOR RASPBERRY PI

      Enabling LTE Cat-1/3G/2G Communication & GNSS Positioning

      Based on SIM7600E

       SIM7600E-LTE-Cat-1-HAT-1_960.jpg
      Features At A Glance
      • Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc.
      • Supports GPS, BeiDou, Glonass, LBS base station positioning
      • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
      • Onboard CP2102 USB to UART converter, for serial debugging
      • Breakout UART control pins, to connect with host boards like Arduino/STM32
      • SIM card slot, supports 1.8V/3V SIM card
      • TF card slot for storing data like files, messages, etc.
      • Onboard audio jack and audio decoder for making telephone call
      • 2x LED indicators, easy to monitor the working status
      • Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
      • Baudrate: 300bps ~ 4Mbps (default: 115200bps)
      • Autobauding baudrate: 9600bps ~ 115200bps
      • Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
      • Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
      Specifications
      LTE CAT-1/3G/2G
      LTE Cat-1 LTE-TDD: B38 / B40 / B41
      LTE-FDD: B1 / B3 / B5 / B7 / B8 / B20
      3G UMTS / HSPA +: B1 / B5 / B8
      2G GSM / GPRS / EDGE: 900 / 1800 MHz
      GNSS
      Receiver type 16-channel
      C/A Code
      Sensitivity -159 dBm (GPS) / -158 dBm (GLONASS) / -159dBm (BeiDou)
      Cold starts: -148 dBm
      Time-To-First-Fix (open air) Cold starts: <35s
      Hot starts: <1s
      SMS AND AUDIO
      SMS Supported types: MT, MO, CB, Text, PDU
      Storage: USIM card and ME (default)
      Audio feature Supports echo cancellation
      Supports noise reduction
      OTHER
      Power supply 5V
      Operating voltage 5V / 3.3V (configured via jumper)
      Operating temperature -30°C ~ 80°C
      Storage temperature -45°C ~ 90°C
      Dimensions 56.21mm × 65.15mm
      Standard Raspberry Pi 40PIN GPIO

      Compatible With Raspberry Pi Series Boards, Jetson Nano

      SIM7600E-LTE-Cat-1-HAT-3_960.jpg SIM7600E-LTE-Cat-1-HAT-5_960.jpg
      Dial-Up On Windows/Linux

      LTE Cat-1: Up To 5Mbps (Uplink) / Up To 10Mbps (Downlink) *
      3G (HSPA+): Up To 5.76Mbps (Uplink) / Up To 42Mbps (Downlink) *

      SIM7600E-LTE-Cat-1-HAT-7_960.jpg

      * stands for idealized data rate, the actual data rate depends on factors like network coverage, traffic congestion, base station condition, etc.

      Cloud Communication

      Supports Communication Protocols Including TCP/UDP/FTP/FTPS/HTTP/HTTPS

      SIM7600E-LTE-Cat-1-HAT-9_960.jpg
      GNSS Positioning

      Supports GPS, BeiDou, Glonass, LBS Base Station Positioning

      SIM7600E-LTE-Cat-1-HAT-11_960.jpg
      Telephoto Call & SMS Support

      Making Telephoto Call Or Sending SMS By AT Commands, With Onboard Audio Jack

      SIM7600E-LTE-Cat-1-HAT-13_960.png
      What's On Board
      SIM7600E-LTE-Cat-1-HAT-15_960.png
      1. SIM7600E
      2. CP2102 USB to UART converter
      3. NAU8810 audio decoder
      4. TXS0108EPWR voltage translator
        • translates 3.3V/5V into 1.8V
      5. MP2128DT power chip
      6. MP1482 power chip
      7. Raspberry Pi GPIO header
        • for connecting with Raspberry Pi
      8. SIM7600 control interface
        • for connecting with host boards like Arduino/STM32
      9. SIM card slot
        • supports 1.8V/3V SIM card
      10. TF card slot
        • for storing data like files, messages, etc.
      11. 3.5mm earphone/mic jack
        • for audio actions like making telephoto call
       
      1. USB interface
        • for testing AT Commands, getting GPS positioning data, etc.
      2. USB TO UART interface
        • for serial debugging, or login to Raspberry Pi
      3. MAIN antenna connector
      4. AUX antenna connector
      5. GNSS antenna connector
      6. Module power switch
      7. Network status indicator
      8. Power indicator
      9. Operating voltage selection jumper
        • VCCIO - 3.3V: set operating voltage as 3.3V
        • VCCIO - 5V: set operating voltage as 5V
      10. UART selection jumper
        • A: access Raspberry Pi via USB to UART
        • B: control the SIM7600 by Raspberry Pi
        • C: control the SIM7600 via USB to UART
      Pinout Definition
      SIM7600E-LTE-Cat-1-HAT-17_960.png
      Outline Dimensions
      SIM7600E-LTE-Cat-1-HAT-19_960.jpg
      Resources & Services
      res_banner.png
      Waveshare Electronics
      WS-17954

      Špecifické referencie

      SIM7600E LTE Cat-1 HAT for Raspberry Pi, 3G / 2G / GNSS Asia, Europe, Africa (WS-17954)

      70,80 €

      59.00 € bez DPH