- Novinka
RLX COMPONENTS s.r.o. , Electronic Components Distributor.
RLX COMPONENTS s.r.o. , Electronic Components Distributor.
VisionFive2 RISC-V Single Board Computer 4GB WiFi, StarFive JH7110 Processor Integrated 3D GPU, Linux (WS-23905)
WS-23905
104,40 €
87.00 € bez DPH
VisionFive2 RISC-V Single Board Computer 4GB WiFi, StarFive JH7110 Processor Integrated 3D GPU, Linux (WS-23905)
VisionFive2 RISC-V Single Board Computer 4GB WiFi, StarFive JH7110 Processor Integrated 3D GPU, Linux (WS-23905)
- VisionFive2 : board only
- RAM : 4GB
- WIFI Module : Included
VisionFive2 RISC-V Single Board Computer, StarFive JH7110 Processor with Integrated 3D GPU, base on Linux
VisionFive2 RISC-V Single Board Computer
Integrated 3D GPU | Base on Linux | Mini-Computer
Onboard RV64GC ISA Quad-core 64-bit SoC, operating frequency up to 1.5GHz
Features at a glance
- Onboard RV64GC ISA Quad-core 64-bit SoC, operating frequency up to 1.5GHz
- Supports OpenCL 3.0, OpenGL ES 3.2 and Vulkan 1.2
- Available in 4GB/8GB LPDDR4 RAM options, and optional wireless module
- Multiple onboard interfaces, including M.2 / CSI / DSI / HDMI / eMMC / USB 3.0 / 40PIN GPIO / RJ45 Gigabit Ethernet port / TF card slot, etc
- Supports 4K@60fps and H264/H265 multi-stream video decoding, 1080p@30fps and H265 multi-stream video encoding
- Onboard 40PIN GPIO header, compatible with the pinout of Raspberry Pi series boards
- Provides wide software compatibility including support for Debian
Kit Selection Guide
| Kit | the VisionFive2 board only | Starter Kit | Display Kit | Starter Box Kit | AI Kit |
| VisionFive2 4GB/8GB | √ | √ | √ | √ | √ |
| WIFI module | optional | optional | optional | optional | optional |
| Starter Kit Accessories Pack: (UART Module, 32GB TF Card, Card Reader, 3PIN Cable, 5V/3A Type-C Power Supply) |
√ | √ | √ | ||
| Display Kit Accessories Pack: (7inch HDMI LCD (H), HDMI cable, HDMI adapter, USB cable, screws pack) |
√ | ||||
| Metal Case + Cooling Fan | √ | ||||
| Hailo-8L | √ |
VisionFive2 Starter Kit (WIFI module optional)
This kit includes VisionFive2 (options for 4GB/8GB RAM), WIFI module (optional) and Starter Kit Accessories Pack, which includes a UART module, 32GB TF card, card reader, 3PIN cable and 5V 3A Type-C power supply, helping users get started with VisionFive2 quickly and develop Debian and Buildrootfs systems in a low cost.
VisionFive2 Display Kit (WIFI module optional)
On the basis of the starter kit, it is equipped with Display Kit Accessories Pack including a 7inch HDMI display, HDMI adapter, HDMI cable, USB cable and screws pack. With the 1024 × 600 resolution wide view angle touch screen, this kit can meet more application scenarios that require display function.
VisionFive2 Starter Box Kit (WIFI module optional)
On the basis of the starter kit, it is equipped with a metal case and cooling fan, which not only protects the internal control board and components, but also effectively dissipates heat from the control board for more stable operation.
VisionFive2 AI Kit (WIFI module optional)
This kit includes VisionFive2 (8GB RAM), it is equipped with 13 TOPS Hailo-8L M.2 AI Accelerator Module, which can be easily integrated to simplify the deployment process and provide powerful inference support for running deep learning models such as YOLOv5, YOLOv8, MobileNet_SSD, etc., greatly enhancing the performance of applications such as target detection, attitude recognition, image segmentation and face recognition.
Specifications
| Processor | StarFive JH7110 | ||
|---|---|---|---|
| CPU | RISC-V U74 Quad-core 64-bit RV64GC ISA SoC With 2MB L2 cache and S7 core, operating frequency up to 1.5GHz |
||
| GPU | IMG BXE-4-32 MC1, operating frequency up to 600MHz | ||
| Memory | Options for 4G/8G Byte LPDDR4 | ||
| Storage | TF card (included in the Display Kit, Starter Kit and Starter Box Kit) | ||
| Camera | MIPI CSI 2lane 1080p@30fps | ||
| Display | 1 × 2-lane MIPI DSI 1080p@30fps 1 × 4-lane MIPI DSI 2K@30fps (Only one DSI port can be used for display at the same time) 1 × HDMI 2.0 4K@30fps, 2K@60fps |
||
| USB Host | 4 × USB 3.0 Type-A port | ||
| USB Device | 1 × USB Device (multiplexed with the USB Type-C port) | ||
| Networking | 2 × Gigabit Ethernet port (1-ch with PoE function) | ||
| Reset button | Press the reset button to reboot when in the U-boot mode; Press and hold the reset button for three seconds to reboot after the system boots |
||
| Boot Mode Switch | RGPIO_1 | RGPIO_0 | Boot Mode |
| 0 | 0 | flash | |
| 0 | 1 | TF Card | |
| 1 | 0 | eMMC | |
| 1 | 1 | UART | |
| Debug pin headers | Multiplex pin 8 and pin 10 (physical address) on the 40PIN header, for UART TX and UART RX functions | ||
| USB Type-C Power port | Supports Quick Charge input 5V DC (minimum 3A) (up to 30 W) Supports 5~20V fixed voltage input Supports USB Type-C PD 2.0, 9V/2A, 12V/2A, 15V/2A, 20V/2A Supports QC 3.0/2.0 adapter, 9V/2A, 12V/1.5A |
||
| Other power supply | 5V input via 40PIN GPIO header PoE port power input, requires external PoE module |
||
| Other interfaces | 40PIN GPIO M.2 M-Key Solid State Drive socket eMMC socket 2PIN Fan header 3.5mm Audio Jack, 4-pole stereo audio jack |
||
| Dimensions | 100 × 74 × 21 (mm) | ||
| Case Dimensions | 106 × 79.5 × 31 (mm) | ||
| Compliance | RoHS, FCC, CE | ||
| Recommended Operating Ambient Temperature | 0~50℃ (If the operating temperature of the chip exceeds 85°C, the frequency and voltage of the CPU will be automatically reduced for cooling) | ||
Operating System
Multi-function
Powerful performance, open source application environment, and rich software ecology
More possibilities for VisonFive 2
Application Examples
Quake 3D
GLMark2
MANE emulator
Run multiple programs simultaneously
Metal case + cooling fan
Better protection and heat dissipation
Better protection and heat dissipation
The case adopts bending steel plates and the powder coating process on the surface, with the protection grade of IP30, more sturdy and durable. can provide better heat dissipation with the cooling fan
* The metal case + cooling fan can be purchased separately.
Precise Cut-Out Design
Each Cut-Out Is Completely Aligned With The Board Interfaces
Easy to connect 40PIN GPIO
Reasonable layout, full use of various interfaces
DIN Rail Mounting design at the bottom
* for reference only, the rail accessories are Not included
How to Install
* for reference only, please refer to the Package Content for the detailed part list
40PIN GPIO Header
* All GPIO pins can be multiplexed to support different functions including
SDIO, Audio, DMIC, SPI, I2C, UART, PWM, CAN
Onboard Resources
- JH7110
- PoE port
- Boot mode selection
- 40Pin GPIO
- 4GB/8GB LPDDR4 SDRAM
- Reboot button
- EEPROM
- Type-C power port
- 2-lane MIPI CSI
- PMIC
- 2PIN FAN header
- Gigabit Ethernet Chip
- Gigabit Ethernet port (with PoE function)
- Gigabit Ethernet port
- HDMI 2.0 port
- 3.5mm Audio Jack
- USB 3.0 Ports
- 4-lane MIPI DSI
- USB 3.0 Host chip
- 2-lane MIPI DSI
- eMMC socket
- TF card slot
- QSPI Flash
- M.2 M-Key
Product Show
* for reference only, please refer to the Package Content for the detailed part list
Dimensions
Certificate of Authorization
Balenie Obsahuje / Package Content
VisionFive2
- Packing and protective case x1
- VisionFive2 (4GB, WiFi) ×1
- WIFI module x1
- Screws pack ×1
WS-23905
Špecifické referencie
VisionFive2 RISC-V Single Board Computer 4GB WiFi, StarFive JH7110 Processor Integrated 3D GPU, Linux (WS-23905)
VisionFive2 RISC-V Single Board Computer 4GB WiFi, StarFive JH7110 Processor Integrated 3D GPU, Linux (WS-23905)
104,40 €
87.00 € bez DPH