CP2102 USB UART Board micro USB (Waveshare WS-CP2102)
      CP2102 USB UART Board micro USB (Waveshare WS-CP2102)
      CP2102 USB UART Board micro USB (Waveshare WS-CP2102)
      CP2102 USB UART Board micro USB (Waveshare WS-CP2102)

      CP2102 USB UART Board micro USB (Waveshare WS-CP2102)

      WS-11325 (WS-CP2102)
      7,08 €

      5.90 € bez DPH

      CP2102 USB UART Board micro USB (Waveshare WS-CP2102)

      Množstvo:
      OUT OF STOCK

      CP2102 USB UART Board micro USB (Waveshare WS-CP2102)

      Overview

      The CP2102 USB UART Board (micro) is an accessory board that features the single-chip USB to UART bridge CP2102 onboard.

      CP2102 features:

      • Single-Chip USB to UART Data Transfer
        • No external resistors required, no external crystal required
        • On-chip power-on reset circuit and voltage regulator
        • Integrated 1024-Byte EEPROM
      • USB Function Controller
        • USB Specification 2.0 compliant; full-speed (12 Mbps)
        • USB suspend states supported via SUSPEND pins
      • UART
        • All handshaking and modem interface signals
        • Data formats supported:
          • Data bits: 5, 6, 7, and 8
          • Stop bits: 1, 1.5, and 2
          • Parity: odd, even, no parity
        • Baud rates: 300 bps to 1 Mbits
        • 576 Byte receive buffer; 640 byte transmit buffer
        • Hardware or X-On/X-Off handshaking supported
        • Event character support
      • Virtual COM Port Device Drivers
        • Windows 8/7/Vista/Server 2003/XP/2000
        • MAC OS-X/OS-9
        • Linux 2.40 or higher
      • USBXpress Direct Driver Support
        • Windows 7/Vista/Server 2003/XP/2000
        • Windows CE
      • Temperature Range
        • –40 to +85 °C

      Features

      • Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/...
      • Voltage output support: 5V or 3.3V
      • Integrated USB protection device: SP0503
      • 3 LEDs: TXD LED, RXD LED, POWER LED
      • Pins accessible on pinheaders: TXD, RXD, RTS, CTS
      • Other pins are accessible on drilled holes, easily connected to user application system (separate pinheaders are provided)

      How to Use

      In the case of working with a MCU:

      • VCCIO: 3.3V or 5V output (the module is powered from USB, onboard jumper should be shorted to 3.3V or 5V)
      • GND: connects to GND
      • TXD: connects to MCU.RX (signal direction: MCU.RX << CP2102 << PC.TX)
      • RXD: connects to MCU.TX (signal direction: MCU.TX >> CP2102 >> PC.RX)
      • RTS: connects to MCU.CTS (signal direction: MCU.CTS << CP2102 << PC.RTS)
      • CTS: connects to MCU.RTS (signal direction: MCU.RTS >> CP2102 >> PC.CTS)

      Note: VCP examples and USBXpress driver program library are provided.

      Dimension

      Development Resources

      Wiki : www.waveshare.com/wiki/CP2102_USB_UART_Board_(micro)

      Waveshare Electronics
      WS-11325 (WS-CP2102)

      Špecifické referencie

      CP2102 USB UART Board micro USB (Waveshare WS-CP2102)

      CP2102 USB UART Board micro USB (Waveshare WS-CP2102)

      7,08 €

      5.90 € bez DPH