10 DOF IMU Sensor, Low Power  (Waveshare 12476) MPU9255, BMP280

10 DOF IMU Sensor (C), Inertial Measurement Unit, Lower Power Consumption

Overview

10 DOF IMU Sensor (C) is good at motion monitor, as well as detecting/measuring the position, height, and temperature. It would be helpful for making your own copter or balancing robot, provides great man-machine interaction.

Features

• MPU9255: 3-axis gyroscope, 3-axis accelerometer, and 3-axis compass/magnetometer
  • Internal Digital Motion Processing™ (DMP™) engine, offloads complicate fusion calculation, sensor synchronization, gesture recognition, etc.
  • Comparing with MPU6050, it is lower power consumption, and more suitable for wearable devices
• BMP280: barometric pressure sensor
  • Embedded temperature sensor for temperature compensation
  • Comparing with BMP180, it is lower power consumption, and higher performance
• You can get the 10 DOF data through I2C interface

Specifications

• Power: 3.3V~5.5V (internal voltage regulation with low dropout)
• Accelerometer
  • Resolution: 16 bit
  • Measurement range (configurable): ±2, ±4, ±8, ±16g
  • Operating current: 450uA
• Gyroscope
  • Resolution: 16 bit
  • Measurement range (configurable): ±250, ±500, ±1000, ±2000°/sec
  • Operating current: 3.2mA
• Compass/Magnetometer
  • Resolution (configurable): 14 or 16 bit
  • Measurement range: ±4800µT
  • Operating current: 280uA
• Barometric pressure sensor
  • Barometric resolution: 0.0016hPa
  • Temperature resolution: 0.01°C
  • Measurement range: 300~1100hPa (altitude: +9000m ~ -500m)
  • Barometric relative accuracy (700hPa~900hPa, 25°C~40°C): ±0.12hPa (±1m)
  • Operating current (1Hz update rate, ultra-low power mode): 2.8uA

Interface

PIN NO.	SYMBOL	DESCRIPTION
1	VCC	3.3V~5.5V power supply
2	GND	power ground
3	SDA	I2C data pin
4	SCL	I2C clock pin
5	INT	MPU9255 digital interrupt output
6	FSYNC	MPU9255 frame sync signal

Dimension

Development Resources

Wiki: www.waveshare.com/wiki/10_DOF_IMU_Sensor_(C)