• Novinka
    5inch e-Paper display, e-ink display, 960 × 552, Black / White, SPI Interface,  Raspberry Pi 40PIN GPIO Header (WS-34058)
    5inch e-Paper display, e-ink display, 960 × 552, Black / White, SPI Interface,  Raspberry Pi 40PIN GPIO Header (WS-34058)
    5inch e-Paper display, e-ink display, 960 × 552, Black / White, SPI Interface,  Raspberry Pi 40PIN GPIO Header (WS-34058)
    5inch e-Paper display, e-ink display, 960 × 552, Black / White, SPI Interface,  Raspberry Pi 40PIN GPIO Header (WS-34058)
    5inch e-Paper display, e-ink display, 960 × 552, Black / White, SPI Interface,  Raspberry Pi 40PIN GPIO Header (WS-34058)
    5inch e-Paper display, e-ink display, 960 × 552, Black / White, SPI Interface,  Raspberry Pi 40PIN GPIO Header (WS-34058)

    5inch e-Paper display, e-ink display, 960 × 552, Black / White, SPI Interface, Raspberry Pi 40PIN GPIO Header (WS-34058)

    WS-34058
    40,47 €

    32.90 € bez DPH

    5inch e-Paper display, e-ink display, 960 × 552, Black / White, SPI Interface,  Raspberry Pi 40PIN GPIO Header (WS-34058)

    Množstvo:
    OUT OF STOCK

    5inch e-Paper display, e-ink display, 960 × 552, Black / White, SPI Interface,  Raspberry Pi 40PIN GPIO Header (WS-34058)

    • with driver HAT
    • Part No.:5inch e-Paper HAT

    5inch e-Paper display, e-ink display, 960 × 552, Black / White, SPI Interface

    5″ e-Paper display

    low power, wide viewing angle, paper-like effect without electricity

    Ideal for price tags, shelf labels, industrial instruments...

     5inch e-Paper display, front view
    Note: the e-Paper Driver HAT is optional, please refer to the Package Content for detailed part list

      • SizeDimension.png5″
      • ResolutionResolution.png960×552
      • Viewing AngleViewing_angle.png>170°
      • Display ColorDisplay-BW.pngBlack/White
      • Grey ScaleGray-scale-2.png2
    • CommunicationSPI.pngSPI
    • Display Panele-Paper.pngE-paper
    • ExperiencePaper.pngPaper-like
    • EnvironmentBulb.pngAmbient Light Required
    • Display TypeReflective.pngPassively Reflective

    Version Options
    5inch e-Paper

    5inch e-Paper
    raw display, without driver board

     
    5inch e-Paper HAT

    5inch e-Paper HAT
    with e-Paper Driver HAT


    Features at a glance
    • No backlight, keeps displaying last content for a long time even when power down
    • Ultra low power consumption, basically power is only required for refreshing
    • Comes with online development resources and manual (e-Paper Driver HAT circuit diagram, examples for Raspberry Pi / Jetson Nano / Arduino / STM32 / ESP32)
    • Optional for e-Paper Driver HAT:
      • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
      • Adapting SPI interface for connecting with controller boards like Raspberry Pi / Arduino / STM32 / ESP32, etc.
      • Onboard voltage translator, compatible with 3.3V / 5V MCUs

    Specifications
    operating voltage Raw display: 3.3V display color Black/White
    with driver HAT: 3.3V/5V
    interface 3-wire SPI, 4-wire SPI grey scale 2
    outline dimensions Raw display: 126.38 × 71.19 × 0.79 (mm) partial refresh time 0.7s
    e-Paper Driver HAT: 30.50 × 65.00 (mm) full refresh time 1.8s
    display size 110.59 × 62.65 (mm) refresh power <50mW
    DOT PITCH 0.1833 × 0.1833 (mm) standby current <0.01uA (almost none)
    RESOLUTION 960 × 552 pixels viewing angle >170°
    Advantages of EINK

    E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
    E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.


    Optional for e-Paper Driver HAT

    Onboard SPI Control Interface, For Use With Controller Boards Like Raspberry Pi / Arduino / STM32 / ESP32

    5inch e-Paper Driver HAT front view, interface introduction
    PWR Power control pin
    BUSY Busy status output
    RST External reset, low active
    DC Data / Command selection (high for data, low for command)
    CS SPI chip selection, low active
    SCLK SPI CLK pin
    DIN SPI MOSI pin
    GND Ground
    VCC 3.3V/5V

    Onboard Voltage Translator

    Compatible With 3.3V / 5V MCUs

    5inch e-Paper display with driver board, onboard voltage translator

    Standard Raspberry Pi 40PIN GPIO header

    compatible with Raspberry Pi series boards, Jetson Nano

    5inch e-Paper Driver HAT, standard Raspberry Pi 40PIN GPIO header
    5inch e-Paper HAT Conneting with Raspberry Pi Zero W

    Conneting with Raspberry Pi Zero

     
    5inch e-Paper HAT Conneting with Jetson Nano

    Conneting with Jetson Nano

    * for reference only, the Raspberry Pi and Jetson Nano in the pictures are NOT included.


    Application examples

    Suitable for price Tags, asset/equipment Tags, shelf labels, conference name tags...


    Outline dimensions

    5inch e-Paper

     5inch e-Paper display, outline dimensions

    e-Paper Driver HAT

     5inch e-Paper HAT, outline dimensions

    Resources & Services
    res_banner.png

    Balenie Obsahuje / Package Content

    5inch e-Paper HAT

    1. 5inch e-Paper HAT x1
    2. MX1.25 9PIN cable ~20cm x1
    3. Screws pack x1
    Waveshare Electronics
    WS-34058

    Špecifické referencie

    5inch e-Paper display, e-ink display, 960 × 552, Black / White, SPI Interface,  Raspberry Pi 40PIN GPIO Header (WS-34058)

    5inch e-Paper display, e-ink display, 960 × 552, Black / White, SPI Interface, Raspberry Pi 40PIN GPIO Header (WS-34058)

    40,47 €

    32.90 € bez DPH