128×80, 1.02inch E-Ink display module, black/white dual-color (WS-17575)

Overview

This is an E-Ink display module, 1.02inch, 128×80 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features

• No backlight, keeps displaying last content for a long time even when power down
• Ultra low power consumption, basically power is only required for refreshing
• SPI control interface, for working with host boards such as Raspberry Pi/Jetson Nano/Arduino/Nucleo
• Onboard voltage translator, compatible with 3.3V/5V MCUs
• Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

• Operating voltage: 3.3V / 5V
• Interface: 3-wire SPI, 4-wire SPI
• Outline dimension: 42mm × 27mm
• Display size: 21.76mm × 14mm
• Dot pitch: 0.175 × 0.17
• Resolution: 128 × 80
• Display color: black, white
• Grey scale: 2
• Full refresh time: 2s
• Refresh power: 26.4mW(typ.)
• Standby power: <0.017mW
• Viewing angle: >170°

Interface

SYMBOL	DESCRIPTION
VCC	3.3V / 5V power input
GND	Ground
DIN	SPI MOSI pin
CLK	SPI SCK pin
CS	SPI chip selection, low active
DC	Data/Command selection (high for data, low for command)
RST	External reset, low active
BUSY	Busy status output, low active

Dimensions

Package Content :

1. 1.02inch e-Paper Module x1
2. 8PIN squid wire x2

Wiki : www.waveshare.com/wiki/1.02inch_e-Paper_Module

Selection Guide

PART NUMBER	COLORS	GREY SCALE	RESOLUTION	DISPLAY SIZE (MM)	OUTLINE DIMENSION (MM)	FULL REFRESH TIME (S)	PARTIAL REFRESH1	PI HEADER2	INTERFACE
1.02inch e-Paper Module	black, white	2	128×80	21.76 × 14.00	42.0 × 27.0	2	√	×	SPI
1.54inch e-Paper Module	black, white	2	200×200	27.60 × 27.60	48.0 × 33.0	2	√	×	SPI
1.54inch e-Paper Module (B)	red, black, white	2	200×200	27.60 × 27.60	48.0 × 33.0	8	×	×	SPI
1.54inch e-Paper Module (C)	yellow, black, white	2	152×152	27.51 × 27.51	48.0 × 33.0	27	×	×	SPI
2.13inch e-Paper HAT	black, white	2	250×122	48.55 × 23.71	65.0 × 30.2	2	√	√	SPI
2.13inch e-Paper HAT (B)	red, black, white	2	212×104	48.55 × 23.71	65.0 × 30.2	15	×	√	SPI
2.13inch e-Paper HAT (C)	yellow, black, white	2	212×104	48.55 × 23.71	65.0 × 30.2	15	×	√	SPI
2.13inch e-Paper HAT (D)	black, white	2	212×104	48.55 × 23.71	59.2 × 29.2	2	√	√	SPI
2.7inch e-Paper HAT	black, white	4	264×176	57.29 × 38.19	85.0 × 56.0	6	×	√	SPI
2.7inch e-Paper HAT (B)	red, black, white	2	264×176	57.29 × 38.19	85.0 × 56.0	15	×	√	SPI
2.9inch e-Paper Module	black, white	2	296×128	66.89 × 29.05	89.5 × 38.0	2	√	×	SPI
2.9inch e-Paper Module (B)	red, black, white	2	296×128	66.89 × 29.05	89.5 × 38.0	15	×	×	SPI
2.9inch e-Paper Module (C)	yellow, black, white	2	296×128	66.89 × 29.05	89.5 × 38.0	15	×	×	SPI
2.9inch e-Paper HAT (D)	black, white	2	296×128	66.90 × 29.06	79.0 × 36.7	2	√	√	SPI
4.2inch e-Paper Module	black, white	2	400×300	84.80 × 63.60	103.0 × 78.5	4	×	×	SPI
4.2inch e-Paper Module (B)	red, black, white	2	400×300	84.80 × 63.60	103.0 × 78.5	15	×	×	SPI
4.2inch e-Paper Module (C)	yellow, black, white	2	400×300	84.80 × 63.60	103.0 × 78.5	15	×	×	SPI
4.3inch e-Paper UART Module	black, white	4	800×600	88.00 × 66.00	118.0 × 75.0	1.5	×	×	UART
5.83inch e-Paper HAT	black, white	2	600×448	118.8 × 88.26	125.4 × 99.5	3.5	×	√	SPI
5.83inch e-Paper HAT (B)	red, black, white	2	600×448	118.8 × 88.26	125.4 × 99.5	14	×	√	SPI
5.83inch e-Paper HAT (C)	yellow, black, white	2	600×448	118.8 × 88.26	125.4 × 99.5	26	×	√	SPI
6inch e-Paper HAT	black, white	16	800×600	122.4 × 90.6	138.4 × 101.8	<1	√	√	USB/SPI/ I80/I2C
6inch HD e-Paper HAT	black, white	16	1448×1072	122.4 × 90.6	138.4 × 101.8	<1	√	√	USB/SPI/ I80
7.5inch e-Paper HAT	black, white	2	800×480	163.20 × 97.92	170.2 × 111.2	5	×	√	SPI
7.5inch e-Paper HAT (B)	red, black, white	2	800×480	163.20 × 97.92	170.2 × 111.2	16	×	√	SPI
7.5inch e-Paper HAT (C)	yellow, black, white	2	640×384	163.20 × 97.92	170.2 × 111.2	16	×	√	SPI
7.8inch e-Paper HAT	black, white	16	1872×1404	158.18 × 118.64	173.8 × 127.6	<1	√	√	USB/SPI/ I80/I2C
9.7inch e-Paper HAT	black, white	16	1200×825	202.8 × 139.43	218.8×156.4	<1	√	√	USB/SPI/ I80/I2C
10.3inch e-Paper HAT (D)	black, white	16	1872×1404	209.66 × 157.25	227.7 × 165.8	<1	√	√	USB/SPI/ I80/I2C
12.48inch e-Paper Module	black, white	2	1304×984	252.98 × 190.90	280.0 × 229.5	<8	×	√	SPI
12.48inch e-Paper Module (B)	red, black, white	2	1304×984	252.98 × 190.90	280.0 × 229.5	<16	×	√	SPI

1. It takes about 0.3s for partial refresh
2. Pi Header: standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards